Hi wondering what I should use in a envirionment where I have 2 core
switches 6513 with sup2 and msfc2 and pfc2 modules onboard.
have about 5 access switches 6513 with sup2 modules connected via trunks to
the core.
Lots of users on different VLANs behind different access switch will use the
few
Hi Eve,
To me this sounds like a definite case of PIM Dense-Mode. This is what Cisco
says:
Dense mode PIM is designed for the following conditions:
Senders and receivers are in close proximity to one another.
There are few senders and many receivers.
The volume of multicast traffic is high.
At 04:59 AM 2/4/02, Eve Mitch wrote:
Hi wondering what I should use in a envirionment where I have 2 core
switches 6513 with sup2 and msfc2 and pfc2 modules onboard.
have about 5 access switches 6513 with sup2 modules connected via trunks to
the core.
Lots of users on different VLANs behind
3 matches
Mail list logo