Re: Ports with PIX Firewall [7:12605]

2001-07-17 Thread Bill Carter
Your config will let everything in!!! Is that what you want??? Lano Kris wrote: > Building configuration... > : Saved > : > PIX Version 6.0(1) > nameif ethernet0 outside security0 > nameif ethernet1 inside security100 > > enable password 2KFQnbNIdI.2KYOU encrypted > passwd 2KFQnbNIdI.2KYOU enc

RE: Ports with PIX Firewall [7:12605]

2001-07-17 Thread Lano Kris
Building configuration... : Saved : PIX Version 6.0(1) nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password 2KFQnbNIdI.2KYOU encrypted passwd 2KFQnbNIdI.2KYOU encrypted hostname pixfirewall fixup protocol ftp 21 fixup protocol http 80 fixup protocol h323 1720 fix

RE: Ports with PIX Firewall [7:12605]

2001-07-17 Thread Lano Kris
Dear All, This is the present configuration . Please suggest the changes which r to be made. Please let me know do I need to open a port for DNS Building configuration... : Saved : PIX Version 6.0(1) nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password 2KFQnbN

RE: Ports with PIX Firewall [7:12605]

2001-07-17 Thread Lano Kris
Building configuration... : Saved : PIX Version 6.0(1) nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password 2KFQnbNIdI.2KYOU encrypted passwd 2KFQnbNIdI.2KYOU encrypted hostname pixfirewall fixup protocol ftp 21 fixup protocol http 80 fixup protocol h323 1720 fix

RE: Ports with PIX Firewall [7:12605]

2001-07-17 Thread Lano Kris
Dear Friends, This is the configuration done till now. Do I need to open some port for DNS Building configuration... : Saved : PIX Version 6.0(1) nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password 2KFQnbNIdI.2KYOU encrypted passwd 2KFQnbNIdI.2KYOU encr

RE: Ports with PIX Firewall [7:12605]

2001-07-17 Thread Kent Hundley
uests automatically. Bottom line, this config is downright dangerous and would completely open the firewall. -Kent -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Tuesday, July 17, 2001 4:17 AM To: [EMAIL PROTECTED] Subject: RE: Ports with PIX Firewall [7:

RE: Ports with PIX Firewall [7:12605]

2001-07-17 Thread Kent Hundley
ffline and send me your config. Again, I cannot stress enough, read the PIX setup doc, it tells you everything you need to get started with a simple configuration. HTH, Kent -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Tuesday, July 17, 2001 1:55 AM To: [EMA

RE: Ports with PIX Firewall [7:12605]

2001-07-17 Thread Sanjeev Tyagi
access-list ping_acl permit icmp any any access-list ping_acl permit tcp any any eq www access-list ping_acl permit tcp any any access-list ping_acl permit udp any any access-list acl_out permit icmp any any access-list acl_out permit tcp any any eq www access-list acl_out permit tcp any any

RE: Ports with PIX Firewall [7:12605]

2001-07-17 Thread Farhan Ahmed
] Subject: RE: Ports with PIX Firewall [7:12605] when u configure the dynamic nat users will start connecting i dont know what u done with the config send me the config to block some port u need for static mapping static (inside,outside) 204.31.17.4 192.168.3.4 netmask 255.255.255.255 conduit

RE: Ports with PIX Firewall [7:12605]

2001-07-17 Thread Farhan Ahmed
outbound 10 permit 192.168.1.42 255.255.255.255 irc tcp apply (INSIDE) 10 outgoing_src SEND ME THE CONFIG -Original Message- From: Lano Kris To: [EMAIL PROTECTED] Sent: 7/17/01 12:54 PM Subject: Ports with PIX Firewall [7:12605] I configured my PIX Firewall and opened all the TCP ports, I

Ports with PIX Firewall [7:12605]

2001-07-17 Thread Lano Kris
I configured my PIX Firewall and opened all the TCP ports, I found that i can ping yahoo or cisco by ip address but not with name i.e ping cisco.com doesn't worked, then I opened all the UDP Ports also and my Surfing started also I was been able to PING by name. I just want to allow port 80 (HTTP