Please note the "sscop open unsuccessful" in the output of the debug atm
sig-all command below:
r6(config)#int atm0
r6(config-if)#shut
r6(config-if)#
04:04:40: ATMSIG-IF:atmSig_clearAllSvc: Port ID : ATM0 Interface Reset
04:04:40: ATMSIG-IF:atmSig_clearAllSvc: Port ID : ATM0 Interface Reset
r6(config-if)#
04:04:42: %LINK-5-CHANGED: Interface ATM0, changed state to administratively
down
04:04:43: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM0, changed
state to down
r6(config-if)#
r6(config-if)#
r6(config-if)#no shut
r6(config-if)#
04:04:49: ATMSIG: startatmsig_ilmi_timer
04:04:49: ATMSIG-IF:atmSig_clearAllSvc: Port ID : ATM0 Interface Reset
r6(config-if)#
04:04:51: %LINK-3-UPDOWN: Interface ATM0, changed state to up
r6(config-if)#
04:04:51: ATMSIG: startatmsig_ilmi_timer
04:04:52: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM0, changed
state to up
r6(config-if)#
04:04:54: ATMSIG-IF : Port ID : ATM0 Status Enquiry
04:04:55: atmsig_ilmi_callback: uni version 2
04:04:55: ATMSIG: sscop open unsuccessful;
ret_code = 0x61CA7688
r6(config-if)#
04:05:04: ATMSIG(ATM0 0,0 - 0246/00): (vcnum:0) API - alloc_connection_id F6
04:05:04:
ATMAPI: (c->s): SETUPv2 ci: 0xF6 mp: 0 ei: 0xFFFFFFFF
04:05:04: ATMSIG: Called len 20
04:05:04: ATMSIG: Calling len 20
04:05:04: ATMSIG(ATM0 0,0 - 0246/00): (vcnum:0) build Setup msg, Null(U0)
state
04:05:04: ATMSIG(ATM0 0,0 - 0246/00): (vcnum:0) API - from sig-client
ATM_OWNER_SMAP
04:05:04: ATMSIG(ATM0 0,0 - 0246/00): (vcnum:248) Input event : Req Setup in
Null(U0)
04:05:04: ATMSIG(ATM0 0,0 - 0246/00): (vcnum:248) Output Setup
msg(XferAndTx), Null(U0) state
04:05:04: ATMSIG: Called Party Addr:
47.000200020002000200020002.222022202220.00
r6(config-if)#
04:05:04: ATMSIG: Calling Party Addr:
47.000100010001000100010001.111011101110.00
04:05:04: ATMSIG(ATM0 0,0 - 0246/00): (vcnum:248) Null(U0) -> Call
Initiated(U1)
04:05:04: E164 NOT Converted
04:05:04: ATMSIG(ATM0 0,0 - 0246/00): (vcnum:248) Input event : Rcvd Release
Complete in Call Initiated(U1)
04:05:04: ATMSIG(ATM0 0,0 - 0246/00): (vcnum:248)cause = mandatory
information element is missing, location = User
04:05:04: ATMSIG(ATM0 0,0 - 0246/00): (vcnum:248) Call Initiated(U1) ->
Null(U0)
04:05:04: ATMSIG(ATM0 0,0 - 0246/00): (vcnum:248) API - notifying Release
Complete event to client ATM0.1
04:05:04:
ATMAPI: (cs): SETUPv2 ci: 0xF7 mp: 0 ei: 0xFFFFFFFF
04:06:04: ATMSIG: Called len 20
04:06:04: ATMSIG: Calling len 20
04:06:04: ATMSIG(ATM0 0,0 - 0247/00): (vcnum:0) build Setup msg, Null(U0)
state
04:06:04: ATMSIG(ATM0 0,0 - 0247/00): (vcnum:0) API - from sig-client
ATM_OWNER_SMAP
04:06:04: ATMSIG(ATM0 0,0 - 0247/00): (vcnum:249) Input event : Req Setup in
Null(U0)
04:06:04: ATMSIG(ATM0 0,0 - 0247/00): (vcnum:249) Output Setup
msg(XferAndTx), Null(U0) state
04:06:04: ATMSIG: Called Party Addr:
47.000200020002000200020002.222022202220.00
r6(config-if)#
04:06:04: ATMSIG: Calling Party Addr:
47.000100010001000100010001.111011101110.00
04:06:04: ATMSIG(ATM0 0,0 - 0247/00): (vcnum:249) Null(U0) -> Call
Initiated(U1)
04:06:04: E164 NOT Converted
04:06:04: ATMSIG(ATM0 0,0 - 0247/00): (vcnum:249) Input event : Rcvd Release
Complete in Call Initiated(U1)
04:06:04: ATMSIG(ATM0 0,0 - 0247/00): (vcnum:249)cause = mandatory
information element is missing, location = User
04:06:04: ATMSIG(ATM0 0,0 - 0247/00): (vcnum:249) Call Initiated(U1) ->
Null(U0)
04:06:04: ATMSIG(ATM0 0,0 - 0247/00): (vcnum:249) API - notifying Release
Complete event to client ATM0.1
04:06:04:
ATMAPI: (c
To: "Tony Schaffran" ; "Cisco Group Study"
; "ccielab"
Sent: Friday, March 07, 2003 4:12 PM
Subject: Re: Problem with Lightstream 100, SVC
> I corrected the ip address but the routers still can not complete the
call.
> Here is the output of the debug atm sig-all after i configured the switch
> that connected routers are users no another switch:
>
>
> r6#
> 04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:0) API - alloc_connection_id
F3
> 04:02:04:
> ATMAPI: (c->s): SETUPv2 ci: 0xF3 mp: 0 ei: 0xFFFFFFFF
> 04:02:04: ATMSIG: Called len 20
> 04:02:04: ATMSIG: Calling len 20
> 04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:0) build Setup msg, Null(U0)
> state
> 04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:0) API - from sig-client
> ATM_OWNER_SMAP
> 04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:245) Input event : Req Setup
in
> Null(U0)
> 04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:245) Output Setup
> msg(XferAndTx), Null(U0) state
> 04:02:04: ATMSIG: Called Party Addr:
> 47.000200020002000200020002.222022202220.00
> r6#
> 04:02:04: ATMSIG: Calling Party Addr:
> 47.000100010001000100010001.111011101110.00
> 04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:245) Null(U0) -> Call
> Initiated(U1)
> 04:02:04: E164 NOT Converted
> 04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:245) Input event : Rcvd
Release
> Complete in Call Initiated(U1)
> 04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:245)cause = mandatory
> information element is missing, location = User
> 04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:245) Call Initiated(U1) ->
> Null(U0)
> 04:02:04: ATMSIG(ATM0 0,0 - 0243/00): (vcnum:245) API - notifying Release
> Complete event to client ATM0.1
> 04:02:04:
> ATMAPI: (c r6#
>
> ===================================
> r9#
> 04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:0) API - alloc_connection_id
E9
> 04:01:04:
> ATMAPI: (c->s): SETUPv2 ci: 0xE9 mp: 0 ei: 0xFFFFFFFF
> 04:01:04: ATMSIG: Called len 20
> 04:01:04: ATMSIG: Calling len 20
> 04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:0) build Setup msg, Null(U0)
> state
> 04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:0) API - from sig-client
> ATM_OWNER_SMAP
> 04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:234) Input event : Req Setup
in
> Null(U0)
> 04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:234) Output Setup
> msg(XferAndTx), Null(U0) state
> 04:01:04: ATMSIG: Called Party Addr:
> 47.000200020002000200020002.222022202220.00
> 04:01:04: ATMSIG: Calling Party Addr:
> 47.000200020002000200020002.222022202220.00
> 04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:234) Null(U0) -> Call
> Initiated(U1)
> 04:01:04: E164 NOT Converted
> 04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:234) Input event : Rcvd
Release
> Complete in Call Initiated(U1)
> 04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:234)cause = mandatory
> information element is missing, location = User
> 04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:234) Call Initiated(U1) ->
> Null(U0)
> 04:01:04: ATMSIG(ATM0 0,0 - 0233/00): (vcnum:234) API - notifying Release
> Complete event to client ATM0.1
> 04:01:04:
> ATMAPI: (c
>
>
>
> ----- Original Message -----
> From: "Tony Schaffran"
> To: "John Tafasi" ; "Cisco Group Study"
> ; "ccielab"
> Sent: Friday, March 07, 2003 1:18 PM
> Subject: Re: Problem with Lightstream 100, SVC
>
>
> > Your IP addresses are incorrect. It looks like you forgot the 8 in 108
on
> > R6.
> >
> >
> >
> > Tony Schaffran
> > Network Analyst
> > CCIE #11071
> > CCNP, CCNA, CCDA,
> > NNCSS, NNCDS, CNE, MCSE
> >
> > www.cconlinelabs.com
> > "Your #1 choice for Cisco rack rentals."
> >
> >
> > ----- Original Message -----
> > From: "John Tafasi"
> > To: "Cisco Group Study" ; "ccielab"
> >
> > Sent: Friday, March 07, 2003 11:37 AM
> > Subject: Problem with Lightstream 100, SVC
> >
> >
> > > Hi Group,
> > >
> > > I have two atm routers that are connected to a Cisco Lightstream 100
atm
> > > switch. I am trying to cause r6 to call r9 but the call does not
> succeed.
> > I
> > > have configured svc routes on the switch and configured the two
routers
> to
> > > use svc to reach each other. Below you will find the necessary
> > > configurations and output of the debug commands. From the output of
the
> > > debug commands on the routers I can see that the routers could not
> > register
> > > their addresses with the arp server.
> > >
> > >
> > > A
> > >
> > > r6#show run
> > > Building configuration...
> > >
> > > Current configuration : 883 bytes
> > > !
> > > version 12.2
> > > service timestamps debug uptime
> > > service timestamps log uptime
> > > no service password-encryption
> > > !
> > > hostname r6
> > > !
> > > !
> > > ip subnet-zero
> > > !
> > > ip ssh time-out 120
> > > ip ssh authentication-retries 3
> > > !
> > > !
> > > !
> > > !
> > > interface Ethernet0
> > > no ip address
> > > shutdown
> > > media-type 10BaseT
> > > !
> > > interface Ethernet1
> > > no ip address
> > > shutdown
> > > media-type 10BaseT
> > > !
> > > interface Serial0
> > > no ip address
> > > shutdown
> > > !
> > > interface Serial1
> > > no ip address
> > > shutdown
> > > !
> > > interface ATM0
> > > no ip address
> > > atm pvc 1 0 5 qsaal
> > > atm pvc 2 0 16 ilmi
> > > no atm ilmi-keepalive
> > > !
> > > interface ATM0.1 multipoint
> > > ip address 138.10.168.1 255.255.255.0
> > > atm nsap-address 47.000100010001000100010001.111011101110.00
> > > atm arp-server nsap 47.000200020002000200020002.222022202220.00
> > > !
> > > !
> > > ip classless
> > > no ip http server
> > > ip pim bidir-enable
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > line con 0
> > > exec-timeout 0 0
> > > logging synchronous
> > > line aux 0
> > > line vty 0 4
> > > login
> > > !
> > > end
> > >
> > > r6#
> > >
> > > =======================
> > >
> > > r9>ena
> > > r9#show run
> > > Building configuration...
> > >
> > > Current configuration : 643 bytes
> > > !
> > > version 12.2
> > > service timestamps debug uptime
> > > service timestamps log uptime
> > > no service password-encryption
> > > !
> > > hostname r9
> > > !
> > > !
> > > ip subnet-zero
> > > !
> > > ip ssh time-out 120
> > > ip ssh authentication-retries 3
> > > !
> > > !
> > > !
> > > !
> > > interface Ethernet0
> > > no ip address
> > > shutdown
> > > !
> > > interface Ethernet1
> > > no ip address
> > > shutdown
> > > !
> > > interface ATM0
> > > no ip address
> > > atm pvc 1 0 5 qsaal
> > > atm pvc 2 0 16 ilmi
> > > no atm ilmi-keepalive
> > > !
> > > interface ATM0.1 multipoint
> > > ip address 138.108.168.2 255.255.255.0
> > > atm nsap-address 47.000200020002000200020002.222022202220.00
> > > atm arp-server self
> > > !
> > > !
> > > ip classless
> > > no ip http server
> > > ip pim bidir-enable
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > line con 0
> > > line aux 0
> > > line vty 0 4
> > > !
> > > end
> > >
> > > r9#
> > >
> > >
> > > ===================
> > >
> > >
> > > LS100#show pvc 0
> > > Bandwidth Available (Forward/Backward/Line Rate): 0.0 / 0.0 /
155.0
> > Mbps
> > > Existing connections : 0 (Uni), 2 (Bi), 0 (Multipoint), 2
> > > (Gateway)
> > > LowLine LowVPI LowVCI HiLine HiVPI HiVCI TrfType CONNECTION
> > > 0 0 5 16 0 2 UBR-BE Gateway
> > > 0 0 16 16 0 3 UBR-BE Gateway
> > > 0 0 32 2 0 32 UBR-BE Bi
> > > 0 0 100 2 0 101 VBR-GS Bi
> > >
> > > LS100#
> > > LS100#
> > > LS100#
> > > LS100#
> > > LS100#
> > > LS100#show pvc 0
> > > Bandwidth Available (Forward/Backward/Line Rate): 0.0 / 0.0 /
155.0
> > Mbps
> > > Existing connections : 0 (Uni), 2 (Bi), 0 (Multipoint), 2
> > > (Gateway)
> > > LowLine LowVPI LowVCI HiLine HiVPI HiVCI TrfType CONNECTION
> > > 0 0 5 16 0 2 UBR-BE Gateway
> > > 0 0 16 16 0 3 UBR-BE Gateway
> > > 0 0 32 2 0 32 UBR-BE Bi
> > > 0 0 100 2 0 101 VBR-GS Bi
> > >
> > > LS100#show pvc 2
> > > Bandwidth Available (Forward/Backward/Line Rate): 0.0 / 0.0 /
155.0
> > Mbps
> > > Existing connections : 0 (Uni), 2 (Bi), 0 (Multipoint), 2
> > > (Gateway)
> > > LowLine LowVPI LowVCI HiLine HiVPI HiVCI TrfType CONNECTION
> > > 2 0 5 16 0 2 UBR-BE Gateway
> > > 2 0 16 16 0 3 UBR-BE Gateway
> > > 2 0 32 0 0 32 UBR-BE Bi
> > > 2 0 101 0 0 100 VBR-GS Bi
> > >
> > > LS100#show route
> > > Destination Type Primary VPI
> Secondary
> > > VPI
> > > 4700010001 0001000100 0100001110 1110111000 NSAP * 0 10
0
> > > 200
> > > 4700020002 0002000200 0200022220 2220222000 NSAP * 2 10
2
> > > 200
> > >
> > > LS100#show line
> > > Line 0 :(GOOD)
> > > Line 1 :(NA)
> > > Line 2 :(GOOD)
> > > Line 3 :(NA)
> > > Line 4 :(Loss of Signal)
> > > Line 5 :(NA)
> > > Line 6 :(Loss of Signal)
> > > Line 7 :(NA)
> > > Line 8 :(NA)
> > > Line 9 :(NA)
> > > Line 10:(NA)
> > > Line 11:(NA)
> > > Line 12:(NA)
> > > Line 13:(NA)
> > > Line 14:(NA)
> > > Line 15:(NA)
> > >
> > > LS100#
> > >
> > >
> > > ======================
> > >
> > > Output of debug atm sig-all on r6
> > >
> > > r6#
> > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) API -
> alloc_connection_id
> > E
> > > 00:14:02:
> > > ATMAPI: (c->s): SETUPv2 ci: 0xE mp: 0 ei: 0xFFFFFFFF
> > > 00:14:02: ATMSIG: Called len 20
> > > 00:14:02: ATMSIG: Calling len 20
> > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) build Setup msg,
> Null(U0)
> > > state
> > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) API - from sig-client
> > > ATM_OWNER_SMAP
> > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Input event : Req
Setup
> > in
> > > Null(U0)
> > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Output Setup
> > > msg(XferAndTx), Null(U0) state
> > > 00:14:02: ATMSIG: Called Party Addr:
> > > 47.000200020002000200020002.222022202220.00
> > > r6#
> > > 00:14:02: ATMSIG: Calling Party Addr:
> > > 47.000100010001000100010001.111011101110.00
> > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Null(U0) -> Call
> > > Initiated(U1)
> > > 00:14:02: E164 NOT Converted
> > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Input event : Rcvd
> > Release
> > > Complete in Call Initiated(U1)
> > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16)cause = Invalid,
> location
> > =
> > > User
> > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Call Initiated(U1) ->
> > > Null(U0)
> > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) API - notifying
Release
> > > Complete event to client ATM0.1
> > > 00:14:02:
> > > ATMAPI: (c > > r6#
> > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) API -
> alloc_connection_id
> > F
> > > 00:15:02:
> > > ATMAPI: (c->s): SETUPv2 ci: 0xF mp: 0 ei: 0xFFFFFFFF
> > > 00:15:02: ATMSIG: Called len 20
> > > 00:15:02: ATMSIG: Calling len 20
> > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) build Setup msg,
> Null(U0)
> > > state
> > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) API - from sig-client
> > > ATM_OWNER_SMAP
> > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Input event : Req
Setup
> > in
> > > Null(U0)
> > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Output Setup
> > > msg(XferAndTx), Null(U0) state
> > > 00:15:02: ATMSIG: Called Party Addr:
> > > 47.000200020002000200020002.222022202220.00
> > > r6#
> > > 00:15:02: ATMSIG: Calling Party Addr:
> > > 47.000100010001000100010001.111011101110.00
> > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Null(U0) -> Call
> > > Initiated(U1)
> > > 00:15:02: E164 NOT Converted
> > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Input event : Rcvd
> > Release
> > > Complete in Call Initiated(U1)
> > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17)cause = Invalid,
> location
> > =
> > > User
> > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Call Initiated(U1) ->
> > > Null(U0)
> > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) API - notifying
Release
> > > Complete event to client ATM0.1
> > > 00:15:02:
> > > ATMAPI: (c > > r6#
> > >
> > > ==============
> > >
> > > Output of debug atm sig-all on r9
> > >
> > >
> > > r6#
> > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) API -
> alloc_connection_id
> > E
> > > 00:14:02:
> > > ATMAPI: (c->s): SETUPv2 ci: 0xE mp: 0 ei: 0xFFFFFFFF
> > > 00:14:02: ATMSIG: Called len 20
> > > 00:14:02: ATMSIG: Calling len 20
> > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) build Setup msg,
> Null(U0)
> > > state
> > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:0) API - from sig-client
> > > ATM_OWNER_SMAP
> > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Input event : Req
Setup
> > in
> > > Null(U0)
> > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Output Setup
> > > msg(XferAndTx), Null(U0) state
> > > 00:14:02: ATMSIG: Called Party Addr:
> > > 47.000200020002000200020002.222022202220.00
> > > r6#
> > > 00:14:02: ATMSIG: Calling Party Addr:
> > > 47.000100010001000100010001.111011101110.00
> > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Null(U0) -> Call
> > > Initiated(U1)
> > > 00:14:02: E164 NOT Converted
> > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Input event : Rcvd
> > Release
> > > Complete in Call Initiated(U1)
> > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16)cause = Invalid,
> location
> > =
> > > User
> > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) Call Initiated(U1) ->
> > > Null(U0)
> > > 00:14:02: ATMSIG(ATM0 0,0 - 0014/00): (vcnum:16) API - notifying
Release
> > > Complete event to client ATM0.1
> > > 00:14:02:
> > > ATMAPI: (c > > r6#
> > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) API -
> alloc_connection_id
> > F
> > > 00:15:02:
> > > ATMAPI: (c->s): SETUPv2 ci: 0xF mp: 0 ei: 0xFFFFFFFF
> > > 00:15:02: ATMSIG: Called len 20
> > > 00:15:02: ATMSIG: Calling len 20
> > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) build Setup msg,
> Null(U0)
> > > state
> > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:0) API - from sig-client
> > > ATM_OWNER_SMAP
> > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Input event : Req
Setup
> > in
> > > Null(U0)
> > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Output Setup
> > > msg(XferAndTx), Null(U0) state
> > > 00:15:02: ATMSIG: Called Party Addr:
> > > 47.000200020002000200020002.222022202220.00
> > > r6#
> > > 00:15:02: ATMSIG: Calling Party Addr:
> > > 47.000100010001000100010001.111011101110.00
> > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Null(U0) -> Call
> > > Initiated(U1)
> > > 00:15:02: E164 NOT Converted
> > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Input event : Rcvd
> > Release
> > > Complete in Call Initiated(U1)
> > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17)cause = Invalid,
> location
> > =
> > > User
> > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) Call Initiated(U1) ->
> > > Null(U0)
> > > 00:15:02: ATMSIG(ATM0 0,0 - 0015/00): (vcnum:17) API - notifying
Release
> > > Complete event to client ATM0.1
> > > 00:15:02:
> > > ATMAPI: (c > > r6#
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=64790&t=64790
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
