Due to the overwhelming number of requests, I'm posting this to the group as well. This is the config I use to dialup from the aux port of a 2501 to earthlink and perform Nat on the negotiated Ip. Current configuration: ! version 11.3 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname ELN/username ! enable password password ! Ip subnet-zero Ip Nat inside source list 99 interface Dialer1 overload Ip name-server 216.142.210.5 chat-script dial ABORT ERROR "" "AT Z" OK "ATm0DT \T" TIMEOUT 30 CONNECT \c ! ! interface Ethernet0 Ip address 192.168.1.2 255.255.255.0 Ip Nat inside ! interface Async1 no Ip address encapsulation ppp dialer in-band dialer pool-member 1 ppp authentication pap chap callin ! interface Dialer1 Ip address negotiated Ip Nat outside encapsulation ppp dialer remote-name ELN/username dialer string 9,9770971 dialer hold-queue 100 dialer pool 1 dialer-group 1 ppp authentication pap chap callin ppp chap hostname ELN/username ppp chap password 0 password ! Ip classless Ip route 0.0.0.0 0.0.0.0 Dialer1 ! access-list 99 permit 192.168.0.0 0.0.255.255 dialer-list 1 protocol Ip permit ! line con 0 line aux 0 no exec script dialer dial modem InOut modem autoconfigure type usr_sportster transport input all stopbits 1 speed 38400 line vty 0 4 password password login ! end -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Thursday, July 12, 2001 5:14 PM To: [EMAIL PROTECTED] Subject: 2 routers, 1 async line I was wondering if you could e-mail the router configurations for external modems using the aux port. Bob Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=12203&t=12203 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]