The 2948G-L3 runs IOS and is really a 50 port router. The 2948(I believe)
runs the cat 5000 firmware. I'm not real sure exactly what you are trying
to do, but if you are wanting VLAN information you will need to do either
ISL or 802.1Q. To use the 2948G-L3 as a "switch" you will have to configure
BVI interfaces and bridge groups.
Jim
CCNP, CCDA, MCSE, HPOCC
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Germain, PJ
Sent: Thursday, June 15, 2000 4:19 PM
To: '[EMAIL PROTECTED]'
Subject: 2948-L3 switches !!
I'm trying to connect a new 2948-L3 switch to an existing 2948. I can't
seem to get them to talk. Can someone please provide me with a brief
procedure on this??
I would greatly appreciate the help.
Thanks,
Pj
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
