Some of my message got filtered in the last one, the syntax was supposed to
look like this:
access-list 105 permit ip (outside address) 255.255.0.0 (demohost)
255.255.255.0
Thanks,
Kris.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=32322&t=32320
---
dependsyou have to check the apps people who wrote it... Some apps will
not work no matter what you do with NAT (This is a VERY common problem
with MS DCOM) so be weary.
-Patrick
>>> "Kris Waters" 01/17/02 12:45PM >>>
I have a Pix 515 running ver. 6.1. I have a host that will be made a
The pix can easily do this. Use one line for each outside address that you
want the inside client to access. You don't say what port you're
contacting on the outside, but you should also limit contact by port.
For example:
access-list 101 permit tcp host 192.168.1.1 host 1.1.1.1 eq www
access
in addition...do not forget your static lines (if traffic is inbound)... =)
Craig Columbus wrote: The pix can easily do this. Use one line for each
outside address that you
want the inside client to access. You don't say what port you're
contacting on the outside, but you should also limit con
4 matches
Mail list logo