... and is spanning tree active on that interface?
> -Original Message-
> From: Larry Ogun-Banjo [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, June 12, 2001 10:30 AM
> To: [EMAIL PROTECTED]
> Subject: fao: Catalyst Gurus [7:8177]
>
>
> We have just installed some new catalyst switches 650
Is spanning-tree running?
... or, to phrase it a little differently, have you enabled portfast on the
port(s) in question?
Thanks!
TJ
-Original Message-
From: Larry Ogun-Banjo [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 12, 2001 11:30
To: [EMAIL PROTECTED]
Subject:
As others have said, check to see if portfast is enabled. But also check to
see if
trunk autonegotiation is enabled and if Etherchannel/Port Aggregation
Protocol is
enabled. These two will typically consume about 18 seconds to negotiate and
figure
out that your Fluke (or other device) isn't trun
is
command will automatically turn off the trunking and ether-channeling
(is that a word? :)), and in addition, will automatically set the
port into portfast mode.
- -Brant.
- - Original Message -
From: "Ethan Haslett"
To:
Sent: Wednesday, June 13, 2001 10:00 AM
Subject: Re: Catalyst Gur
range)
Subject: Re: Catalyst Gurus [7:8177]
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I don't know if this was said, and I apologize if it's a duplicate,
but but I'll say it anyway...
Depending on the version of CatOS you are using, (anything above
5.4x) will include a macro
5 matches
Mail list logo
