I think it is not possible. As a router only hold one routing
table. The WAN address for S0 & S1 must be in same prefix
but the router will not allow you to configure it
Rgds,
Sam
> -----Original Message-----
> From: Nomi [SMTP:[EMAIL PROTECTED]]
> Sent: Tuesday, December 12, 2000 8:32 AM
> To: [EMAIL PROTECTED]
> Subject: Connecting S0 & S1 back 2 back of single router
>
> Dear Users,
>
> Plz. help me in solving a problem , Is it possible to connect serial =
> interface of single router back to back to enable routing & use it for =
> Routing protocols. If it is possible than how to do it ?
>
> I have a vauge picture of it how to connect S0 & S1 of Router 2511 i-e =
> serial cable at both the interfaces and than both interface are =
> connected throiugh roll over cable / cross cable.
>
> Please comment on it.=20
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
