If you want a quick test to see if the earth is good or not, your voltmeter
will do (on AC mode). Just stick one lead into the live socket and the other
into the ground socket. If it reads the same as when measured between live
and neutral, then your ground is good. Alternatively, if you measure
A megger is typically used to test continuity to earth ground. I
sometimes do a quick check between my equipment chassis and the ground slot
in a three prong receptacle. But that is a very generic test. If I'm
concerned about noise or something, I get out an o'scope.
Joupin wrote:
Dear
2 matches
Mail list logo
