Re: GBIC Types [7:56468]

2002-10-29 Thread John Neiberger
Show interface. A few lines down it will say "media type is SX" or whatever. HTH, John >>> "Tim Champion" 10/29/02 10:28:05 AM >>> Does anyone know of a show command on a Catalyst 5k which will show the type of GBIC installed, SH, LX/LH etc? Many thanks Tim Message Posted at: http://www.gr

RE: GBIC Types [7:56468]

2002-10-29 Thread David C Prall
show port should contain this information under the Type heading. http://www.cisco.com/en/US/products/hw/switches/ps679/products_configuration _guide_chapter09186a008007eedb.html -- David C Prall [EMAIL PROTECTED] http://dcp.dcptech.com > -Original Message- > From: [EMAIL PROTECTED] [ma

Re: GBIC Types [7:56468]

2002-10-29 Thread John Neiberger
Oops...yes, on a Cat5k...heh heh I missed that. Show int works on my cat6k! :-) >>> [EMAIL PROTECTED] 10/29/02 11:16:42 AM >>> don't you mean sh port?? Dave John Neiberger wrote: > > Show interface. A few lines down it will say "media type is SX" or > whatever. > > HTH, > John > > >

Re: GBIC Types [7:56468]

2002-10-29 Thread Larry Letterman
sh port Tim Champion wrote: >Does anyone know of a show command on a Catalyst 5k which will show the type >of GBIC installed, SH, LX/LH etc? > >Many thanks > >Tim Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=56492&t=56468 --

RE: GBIC Types [7:56468]

2002-10-30 Thread Net Admin (MNET)
Hi, Use the command - show port capabilities, that works on my 5500's. Regards Colin Tetluk CCIE# 5767 -Original Message- From: Larry Letterman [mailto:lletterm@;cisco.com] Sent: Tuesday, October 29, 2002 11:35 PM To: [EMAIL PROTECTED] Subject: Re: GBIC Types [7:56468] sh