Scott, I spent most of last week working on 2 6509s in a similar scenario.
Use the link below for a good explanation of HSRP configs on the 6500s.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sft_6_1/configgd
/redund.htm
Vijay Ramcharan, CCNP,CCDP,MCSE
Network Manager
The Deal, L.L.C.
http://www.thedeal.com
mailto:[EMAIL PROTECTED]
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Davis, Scott [ISE/RAC]
Sent: Monday, April 16, 2001 3:48 PM
To: [EMAIL PROTECTED]
Subject: HSRP? problem [7:811]
I just added a VLAN to my Cat6509s. The interfaces for the vlan are
configured on both MSFCs in both of my 6509s. We are using HSRP. both
interfaces show up/up the VLAN shows active in the VTP server(a) and
client(b) 6509. I set the standby priority on the vlan int config on the
MSFC to 100 on 6509a and 95 on 6509b. The ip addresses are configured
correctly on both (x.x.7.0/24 range 6509a int x.x.7.1 255.255.255.0 6509b
int x.x.7.2 255.255.255.0) the standby ip address is pingable from both
switches. When I "no shut" the ints on the MSFCs 6509a comes up normally and
shows state change to active and is pingable, 6509B shows state change to
active then a few minutes later to standby and the ip address is not
pingable even though the interface shows up/up. If I shutdown 6509a VLAN
int, x.x.7.2 is pingable and the state change is to active until a is
brought back up. I am sure I am missing something but apparently I can't see
it. Any ideas?
thanks
Scott
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=817&t=811
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]