the line must be n interective mode if u want the user to select the proto
or the AS to autosence the proto used based on there flags.
u just need to put the line in interactive mode b4 the autoselect command,
that's it, cause in dedicated mode the line is simply bound to the proto
defined.
H T
The cmd autoselect ppp instructs the interface to only start the ppp
protocol if it detects incoming PPP packets. So the calling device must
initiate the PPP negotiation.
However, for this to work on the router, the async. interface must be set to
allow the incoming connection to chose the type
HI,
I found the following Answer somewhere on the CISCO TAC :
If you issue the autoselect ppp line configuration command, you must first
issue the async mode interactive asynchronous interface configuration
command. The async mode interactive command enables the interface to select
a protocol
3 matches
Mail list logo
