Obviously the issue is on the Spoke router. Without the config I won't be able to tell what exactly is misconfigured. But I would check the access-list first, and if you have NAT configured, check the route-map.
-- Lidiya White -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Karaoghlanian, Hagop Sent: Tuesday, November 26, 2002 10:51 AM To: [EMAIL PROTECTED] Subject: Hub-Spoke VPN tunnel problem [7:58114] Hello gentelmen, Heres my problem. I have ---------------- --------------------- Hub | | spoke | |-------------------------------------------------------------------------- ---------------- |--------------------| LAN address 192.100.70.1 LAN address (above) 192.100.0.1 Thus far if I do an extended ping test from the Hub router's LAN to the spoke router's LAN, I get 0% success rate on the pings, however, when I do "show crypto engine connection active" I get from hub (4 encrypts but no decrypts) and I get 4 decrypts on the spoke router with 0 encrypts) any suggestions would be very appreciated. thanks HK Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=58121&t=58114 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]