Upgrade to netware 5 and use IP... If not you should always try to filter
as close to the source of the traffic as you can. If your using Cisco I
would recommend using EIGRP with incremental SAP updates.
Cory
-Original Message-
From: KOLIY [mailto:[EMAIL PROTECTED]]
Sent: Thursday, Mar
Cory <[EMAIL PROTECTED]>
To: 'KOLIY' <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Thursday, March 08, 2001 1:36 PM
Subject: RE: IPX Question
> Upgrade to netware 5 and use IP... If not you should always try to filter
> as close to the source of the traffic as
Both is best,
Run something like IPX EIGRP make sure you turn IPX Rip off on your WAN links. Run a
filter at every point to filter SAP and networks. After all, do all the sites need to
see the devices on all other sites. The best way to get nice results are to "DESIGN
YOUR IPX WAN" don't le
'config' or load up INETCFG
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=48564&t=48505
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EM
There is a NCP used in (Novell Netware Core Protocol) and PPP use a NCP
(Network Control Protocol)
Hope this aint html IAN
Duck
- Original Message -
From: Mooney Drew-DMOONEY1 <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, August 03, 2000 10:40 PM
Subject: IPX question on NCP
5 matches
Mail list logo