Michelle,
Check this ISDN debug ppp site.
http://www.cisco.com/warp/public/112/chapter17.htm#ISDNOUT , ISDN Outbound
Calling section.
Your log was not attached to the message so we don't know what happened.
Also, try adding
ppp authentication chap
to your config under your BRI0/0 interface and see if it makes any
difference. Both sides need the same encap usernames/passwords,
compression, authentication method.
good luck!
- susan
-----Original Message-----
From: Michelle Sanderson [mailto:[EMAIL PROTECTED]]
Sent: Monday, May 21, 2001 1:36 PM
To: [EMAIL PROTECTED]
Subject: ISDN [7:5295]
Please help, I can't ping the remote side of this ISDN connection.
Here is the config AND the log with debug ppp negotiation showing a
PROTREJ(toward the end of output). Does that mean PPP is not working or
setup right?
When I ping the remote, the call is made to the customer but I don't get a
reply. Also, if I show ip route after I ping(while the line is still up) I
see a route like this 192.168.2.58/32 what does the /32 mean-I know it's
subnet bits but how is it 32? Before the dialer makes the call if I show ip
route I see it as 192.168.2.56/29(I'm 192.168.2.57 and customer is
192.168.2.58) The rest of the output show what happens when I ping the other
side with debug ppp negotiation on. Thanks for any help.
isdn switch-type basic-ni1
!
interface BRI0/0
ip address 192.168.2.57 255.255.255.248
encapsulation ppp
isdn spid1 9258255950xxxx
isdn spid2 9258255957xxxx
dialer idle-timeout 57
dialer map ip 192.168.2.58 name customer 1904296xxxx
dialer-group 1
ppp chap hostname service
ppp chap password xxxxxxx
ping 192.168.2.58
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.2.58, timeout is 2 seconds:
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5312&t=5295
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
