is so fast now.
Regards,
Ismail Al-Shelh
-Original Message-
From: Mark Smith [mailto:[EMAIL PROTECTED]
Sent: Tuesday, June 17, 2003 2:37 PM
To: [EMAIL PROTECTED]
Subject: RE: Internet is very slow behind Pix 515E UR [7:70783]
"100basetx" is 100MB, half duplex. Try "inte
ne 17, 2003 10:26 AM
To: [EMAIL PROTECTED]
Subject: RE: Internet is very slow behind Pix 515E UR [7:70783]
Try taking the access-lists off the interfaces and try again. The access
control list acting on the interfaces means that every single packet
going
through the interface is inspected.
Steve W
where is the access-group acl_out??
u haven't defined it
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=70905&t=70783
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Non
sorry!! i mean the access-list "acl_out"
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=70906&t=70783
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure viol
"100basetx" is 100MB, half duplex. Try "interface ethernet0 100full" and
"interface ethernet1 100full" instead.
Make sure that whatever is on the other side of the outside interface is
100/full or auto too.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Tuesday
Your PIX interfaces are set for 100/half duplex. If you want 100/full duplex
then specify "100full" in the config. Verify by a "sh int"
> -Original Message-
> From: Ismail Al-Shelh [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, June 17, 2003 10:19 AM
> To: [EMAIL PROTECTED]
> Subject: Internet
Try taking the access-lists off the interfaces and try again. The access
control list acting on the interfaces means that every single packet going
through the interface is inspected.
Steve Wilson
Network Engineer
-Original Message-
From: Ismail Al-Shelh [mailto:[EMAIL PROTECTED]
Sent
7 matches
Mail list logo
