I'll try part "B" Left5505> (enable) sh ver WS-C5505 Software, Version McpSW: 5.5(13a) NmpSW: 5.5(13a) Left5505> (enable) sh port capabilities Model WS-X5509 etc. etc. Cat4006> (enable) sh ver WS-C4006 Software, Version NmpSW: 5.4(2) Cat4006> (enable) sh port ? cdp Show port CDP information capabilities Show port capabilities etc.
Older versions of CatOS did not have this command. I don't recall when it became available. > -----Original Message----- > From: ericbrouwers [mailto:[EMAIL PROTECTED] > Sent: Tuesday, March 18, 2003 12:25 AM > To: [EMAIL PROTECTED] > Subject: Looking for equivalent commands on IOS/CatOS > switches [7:65635] > > > Hi there, > > I'm looking for CatOS commands that are equivalent to the IOS > based commands > below: > > Clear the CDP table clear cdp table > Display CDP counters show cdp traffic > Reset CDP counters clear cdp counters > > Moreover, is there an IOS command that is similar to "show > port capabilities" > on CatOS? > > I haven't found these yet. Any help would be appreciated. Thanks, > > Eric Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=65665&t=65665 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
