As long as the PIX is 'pointed to' the inside Ethernet interface of the router the PIX should never know about anything past that. Does your PIX point to the router as its DG? Do you have the address space for your BGP AS# configured properly with your ISP's? Does this happen regardless of which ISP is left & which one is removed? ... and when you say the router is routing to the remaining ISP; do you mean you see routes forming or do you mean you can pass packets? > Thanks! TJ -----Original Message----- From: Bob [mailto:[EMAIL PROTECTED]] Sent: Monday, September 10, 2001 6:01 PM To: [EMAIL PROTECTED] Subject: Multihoming BGP with two seperate ISP's via single router that [7:19328] Hello, I am multihoming BGP with two seperate ISP's via single router that is connected to a PIX. When I shutdown the one of my serial ports to one of the ISP's you can see the BGP table removing paths. All trace's show that the router starts routing to the ISP that is still active, but all the workstations on the inside of the pix interface can no longer route. I've read where the PIX Firewall does not support the use of BGP, and that I could use RIP between them. Does anyone have an example of this configuration? My searches on this subject within Cisco's knowledgebase have not been very successfull. Or if you can think of another solution for my setup, please let me know. Thank you, ***************************************************************************** The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions expressed in the governing KPMG client engagement letter. ***************************************************************************** Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=19393&t=19393 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]