Chuck, You are the ONLY person to say this to me, so I am asking the list for confirmation what you wrote is true.
I am ordering Point to Point T1's from one location to another that is sensitive about Rack Unit usage. I suspect if I buy two NM-4T1-IMA's and connect up to a regular T1 it will work? Note: I control the equipment on both sides of this link. Anyone else want to comment? -----Original Message----- From: Chuck Larrieu [mailto:[EMAIL PROTECTED]] Sent: Saturday, December 07, 2002 17:37 PM To: "Aaron J. Moreau-Cook" Subject: Re: NM-4T1-IMA with T1 [7:58751] ----- Original Message ----- From: ""Aaron J. Moreau-Cook"" Newsgroups: groupstudy.cisco Sent: Saturday, 07 December, 2002 2:23 PM Subject: NM-4T1-IMA with T1 [7:58751] > Could I use a NM-4T1-IMA with 4 regular T1 (b8zs/esf)? CL: yes you can. you will need a ATM T1 card on the other side. You can't just use the IMA port on one side and a regular old T1 CSU on the other. CL One of my pals at work has done several of these. CL: I am not sure that you can use the IMA car on one side and the AIM card / port on the other. HTH > > I'm trying to cram as many T1's into a Cisco 3620 as possible. > > The basic question is, is the NM-4T1-IMA product line ONLY compatible with > ATM T1's. > > Dazed and Confused > > Aaron Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=58758&t=58751 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]