Hi This is Dheeru from India The solution for your Password Recovery for BAY ARN is as follows: 1.Power cycle the ARN. 2.When the ARN starts cycling through Power On Diags, type Ctrl C followed by a carriage return. This will put you in diagnostic mode and you will see the following prompt: Diag_1> 3.At this prompt, type in the following command exactly: d/l/n:5 410000 0 This sequence will blank out the Manager password in NVRAM. 4.Type boot or power cycle the ARN. There is no longer a Manager password. I hope this should work out as I am in a company which is mainly implementing Nortel Products . Thanx Regds dheeru Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=15590&t=15590 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]