Pierre-Alex,
Make sure you have the following command under the interface config:
ip rip authentication mode {text | md5}
Here is the link for rip as well. (watch the line wrap)
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/np1_c
/1cprt1/1crip.htm
Don
-----Original Message-----
From: Pierre-Alex GUANEL [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, December 27, 2000 2:59 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: RIP Version 2 Authentication
I have 2 routers Router A and Router B. Router A and B both run RIP Version
2
I want Router A to require authentication from Router B before Router A can
accept Router B updates.
On Router A I have added the following:
***configuration mode******
key chain Tewa
key 1
key-string abcdefg
***interface mode******
ip rip authentication key-chain Teway
Putting the same configuration I did on Router A in Router B does not work.
I get the following message using debug ip rip: RIP: ignored v2 packet from
1.0.0.11 (invalid authentication. Do you know which commands I should use
for Router B?
Thank You
Pierre-Alex
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]