Andrew,
Thank you for the information. But I do not want to write the configuration to flash. I want the save the configuration on my management station. I want to send a command using SNMP from my management station to the switch and retrieve the configuration back to the management station. Is it possible for the 4006 ? Is there a special command that I can send form the management station to the Catalyst in order to retrieve the configuration back on the management station ? Any information is welcome. Thank you. -----Message d'origine----- De : Andrew Larkins [mailto:[EMAIL PROTECTED]] Envoyi : lundi 2 septembre 2002 14:44 @ : BASSOLE Rock Objet : RE: Saving the configuration of Catalyst 4006 [7:52531] you need to save using the "write mem" command to save to flash. Cat4000 (enable) write ? memory Write to NV memory network Write to network terminal Write to terminal tech-support Write tech-support IP address or hostname -----Original Message----- From: BASSOLE Rock [mailto:[EMAIL PROTECTED]] Sent: 02 September 2002 13:49 To: [EMAIL PROTECTED] Subject: Saving the configuration of Catalyst 4006 [7:52531] Hello group, I' am saving the configuration of a Catalyst 3548 on a management station using the command : "copy running to net" via SNMP. The Catalyst 3548 is running : Version 12.0(5.4)WC(1) I tried to save the configuration of a Catalyst 4006 using the same command but it did not work. The CatOS version on the switch is : Version NmpSW: 6.3(1) Is it possible to send a specific command from the management station using SNMP in order to save the configuration ? If so can you please give the specific command. Any other help is welcome. Thank's in advance. Rock BASSOLE Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52536&t=52531 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]