send me  show controllers

-----Original Message-----
From: Andrew Larkins [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 18, 2001 4:01 PM
To: [EMAIL PROTECTED]
Subject: RE: WAN link funnies - UP UP but no comms- on same subnet!!!
[7:12785]


The interface resets are from when we moved the config to other ports to
rule out physical issues

First side
Serial3/0 is up, line protocol is up 
  Hardware is CD2430 in sync mode
  Description: xxxxxxxx
  Internet address is 10.99.253.17/30
  MTU 1500 bytes, BW 128 Kbit, DLY 20000 usec, rely 255/255, load 1/255
  Encapsulation HDLC, loopback not set, keepalive set (10 sec)
  Last input 00:00:00, output 00:00:00, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/75/0 (size/max/drops); Total output drops: 0
  Queueing strategy: priority-list 1
  Output queue (queue priority: size/max/drops):
     high: 0/20/0, medium: 0/40/0, normal: 0/60/0, low: 0/80/0
  5 minute input rate 25000 bits/sec, 60 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     1073220 packets input, 61641174 bytes, 0 no buffer
     Received 1911 broadcasts, 0 runts, 0 giants, 0 throttles
     2 input errors, 0 CRC, 0 frame, 2 overrun, 0 ignored, 0 abort
     9220 packets output, 906798 bytes, 0 underruns
     0 output errors, 0 collisions, 4 interface resets
     0 output buffer failures, 0 output buffers swapped out
     0 carrier transitions
     DCD=up  DSR=up  DTR=up  RTS=up  CTS=up

Remote side:
Serial1/0 is up, line protocol is up 
  Hardware is CD2430 in sync mode
  Description: xxxxxxx 
  Internet address is 10.99.253.18/30
  MTU 1500 bytes, BW 128 Kbit, DLY 20000 usec, rely 255/255, load 1/255
  Encapsulation HDLC, loopback not set, keepalive set (10 sec)
  Last input 00:00:02, output 00:00:02, output hang never
  Last clearing of "show interface" counters 00:00:02
  Input queue: 0/75/0 (size/max/drops); Total output drops: 0
  Queueing strategy: priority-list 1
  Output queue (queue priority: size/max/drops):
     high: 0/20/0, medium: 0/40/0, normal: 0/60/0, low: 0/80/0
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     1 packets input, 56 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
     1 packets output, 56 bytes, 0 underruns
     0 output errors, 0 collisions, 0 interface resets
     0 output buffer failures, 0 output buffers swapped out
     0 carrier transitions
     DCD=up  DSR=up  DTR=up  RTS=up  CTS=up

-----Original Message-----
From: Farhan Ahmed [mailto:[EMAIL PROTECTED]]
Sent: 18 July 2001 13:24
To: 'Andrew Larkins'
Subject: RE: WAN link funnies - UP UP but no comms- on same subnet!!!
[7:1 2780]


send me the sh int

-----Original Message-----
From: Andrew Larkins [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 18, 2001 3:17 PM
To: [EMAIL PROTECTED]
Subject: RE: WAN link funnies - UP UP but no comms- on same subnet!!!
[7:12780]


the very weird thing here is at RTS DTS etc are all up.... both devices are
on a /30 subnet no problems here. I do not need any routing because these
are directly connected networks. NO crc errors on link flap/ interface
resets!!

Very confused

-----Original Message-----
From: Phil Barker [mailto:[EMAIL PROTECTED]]
Sent: 18 July 2001 12:45
To: [EMAIL PROTECTED]
Subject: Re: WAN link funnies - UP UP but no comms- on same subnet!!!
[7:12778]


Andrew,
     From what you say your remote end is working fine
both in Tx and Rx and your Tx is working fine since
remote end sees your cdp. Your Rx appears to be the
problem. Have you tried swapping out your local Serial
cable ? What about 'sh int serial xxx' to check your
pins ? DCD RTS etc.

regards,

Phil.
 --- Andrew Larkins 
wrote: > HI all, 
> 
> Strange problem here.
> 
> The serial interface are UP UP on both sides, but we
> are not able to ping
> each other  - even though directly connected. A
> "debug ip ICMP" on the
> remote site shows the ping coming through and
> replying, but the reply never
> gets back.
> Also the remote site saw my router using CDP, but I
> do not see him.
> 
> Any ideas??
> 
> I believe this is Telco related, but the line shows
> clean from the interface
> stats
> 
> Andrew
[EMAIL PROTECTED] 

____________________________________________________________
Do You Yahoo!?
Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk
or your free @yahoo.ie address at http://mail.yahoo.ie




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12792&t=12792
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to