RE: cisco lab [7:15484]

A Cisco 2509 or 2511 is usually what is used for reverse telnet connections to the CON ports of other routers. Kelly D Griffin, CCDA, CCNA Network Engineer Kg2 Network Design http://kg2.com 877.418.4025 Toll-Free 501.418.4026 Fax -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL

Re: cisco lab [7:15484]

You can get a 2511 or 516 access router... the 516 will give you 16 telnet ports wich can be hooked up to your console ports on the routers... Or once your configured, you can simply type in the address of the router you want to play with, and it will log you in. - Original Message -

Re: cisco lab [7:15484]

Actually, if you are looking for a cheaper, but older, alternative for a Term Server, you could go with one of the 500-CS models like I did for my lab. They don't provide the Serial interfaces (mine actually only has a single Eth int) but they work just as well for Reverse Telnetting at nearly h

RE: cisco lab [7:15484]

of the stuff already) than picking up a 2511 just for access... Bob > -Original Message- > From: Kelly D Griffin [mailto:[EMAIL PROTECTED]] > Sent: Thursday, August 09, 2001 10:29 AM > To: [EMAIL PROTECTED] > Subject: RE: cisco lab [7:15484] > > > A Cisco 2509

RE: cisco lab [7:15484]

om: Kelly D Griffin [mailto:[EMAIL PROTECTED]] > Sent: Thursday, August 09, 2001 10:29 AM > To: [EMAIL PROTECTED] > Subject: RE: cisco lab [7:15484] > > > A Cisco 2509 or 2511 is usually what is used for reverse > telnet connections > to the CON ports of other routers. > &

Re: cisco lab [7:15484]

Or if you want to get really crazy, get a 2610/2611 with 2 WIC-2Ts and an NM-16A module, now you have your Terminal server and Frame switch in one chassis. -Russ ""george gittins"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I have some spare cisco routers to play around wi