conf t
boot system flash (filenamehere)
Ctl Z
Cop run start
reload
To remove the old IP only version of IOS:
delete (filenamehere)
squeeze flash
The squeeze flash actually removed the file that was marked as deleted in
the previous step.
The best reference for commands like these are CCO or the book that ships
with each new router.
Good luck,
Jeff Odell
CCNA CCDA
Network Specialist
949-453-4377
800-739-5837 pager
949-500-3184 cell phone
-----Original Message-----
From: Niraj Palikhey [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 13, 2000 7:14 AM
To: [EMAIL PROTECTED]
Subject: ipx on a 804 router?
Hi,
I have a 804 router that I tftp'ed an ip/ipx ios to flash. When I do a sh
flash, I see a TinyRom, the ip ios and the new ip/ipx ios. But when I do a
sh ver, it shows the older ip ios. I cannot configure ipx routing on this
router or igrp? The config register is set to 0x2102. Is this the setting
that I need to change for the new ios to take effect? What would it be?
Aside from this, Is there a book that explains basic things like this? I
have read many Cisco CCNA books but none of them focus on basic things like
this which I feel is so important to know. All the books talk is about
passing the exam, that's all.
Please advise.
Thank you.
Kind regards,
[EMAIL PROTECTED]
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
