Amir,
you need NM-1CE1/PRI (one E1 port) or NM-2CE1/PRI (two E1 ports).
Amir Aziz wrote:
Hi everybody,
I am here in Pakistan and we have E1 running at our ISP setup. OUR Telco
provide E1 facility on G703/704I want to terminate these E1 lines directly
into my router currently I am
Hi Amir,
go to the following link, it lists all the available modules for the 3600
series. Look for the 1-Port Fast Ethernet, with 1-Port or 2-Port E1/ISDN
PRI, Balanced or Unbalanced module or the 1-Port/2-Port Channelized E1/ISDN
PRI Unbalanced or Balanced modules:
Amir,
I would start here
http://www.cisco.com/warp/public/107/hw-e1.shtml
since you have as5300 they are probably balanced/120 ohms and terminate with
rj45. Don't forget the cable as the all E1 nm modules terminate with 15pin
D.
Best regards,
Rah
-Original Message-
From: Amir Aziz
3 matches
Mail list logo