I take your post to mean that you hold down the ctrl+shift+6 keys together then release them and then hit the "x" key. I'm assuming that you do reach the intended router from the terminal server - just that you can't return to the terminal server. I've had that happen a few times where nothing seems to happen. If I hit enter then I'm back at the router prompt. If I try it several times it eventually works. I just experimented with a lab setup - it works. Here's the config: hostname Term_srv ! no ip domain-lookup ip host r1 2001 1.1.1.1 ip host r2 2002 1.1.1.1 ip host r3 2003 1.1.1.1 ip host r4 2004 1.1.1.1 ip host r5 2005 1.1.1.1 ip host r6 2006 1.1.1.1 ip host r7 2007 1.1.1.1 ip host r8 2008 1.1.1.1 ! interface Loopback0 ip address 1.1.1.1 255.255.255.255 ! line con 0 exec-timeout 0 0 line 1 8 no exec transport input telnet
> -----Original Message----- > From: mahadevan pattabiraman [mailto:[EMAIL PROTECTED]] > Sent: Friday, December 27, 2002 8:04 PM > To: [EMAIL PROTECTED] > Subject: teminal server keys are not working [7:59891] > > > Hi > I have a lab here and i am not able to make the > ctrl+shift+6+x key to work and i tried secure crt > instead of hyperterminal with the same resutlt.Any > suggestions?? the key when pressed in the sequence > above does not take the terminal back the the terminal > server but whereas it stays in the router itsself.Any > advice or suggestions would be appreciated. > > > Thanks > Maha > > > > __________________________________________________ > Do You Yahoo!? > Everything you'll ever need on one web page > from News and Sport to Email and Music Charts > http://uk.my.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59892&t=59891 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]