You need to announce all your local subnets :
- by using the network command, u can announce all subnets already placed in
the routing table by an IGP
- by redistributing your IGP on BGP using the redistribute
command in router bgp config mode
I see some OSPF routes in your routing table, so
You have to have IP connectivity to your neighbor before BGP will work.
Static routes will get you the same thing as RIP.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Stephen C
Sent: Friday, November 30, 2001 2:37 PM
To: [EMAIL PROTECTED]
Subject: BGP
: RE: BGP question [7:27879]
You have to have IP connectivity to your neighbor before BGP will work.
Static routes will get you the same thing as RIP.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Stephen C
Sent: Friday, November 30, 2001 2:37 PM
That's normal. BGP doesn't actually route data like an IGP does, it only
handles routing information. You don't have to use RIP, you can use an
IGP or (preferably) static routes.
Hal Logan
Network Specialist / Adjunct Faculty
Computing and Engineering Technology
Manatee Community College
It may work, but in real world redistributing from IGP to BGP is very bad
practice.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Stephane LITKOWSKI
Sent: Friday, November 30, 2001 3:23 PM
To: [EMAIL PROTECTED]
Subject: Re: BGP question [7:27879]
You
Stephen,
BGP is not like other routing protocol where you use the network command to
run bgp on that interface. The network command is used to announce networks
that the router know about to its neighbor. This means that you must
already have a route on your router either via Static, IGRP,
Can we see your whole config?
ccie1ab
-Original Message-
From: Bill Carter [mailto:[EMAIL PROTECTED]]
Sent: Friday, November 30, 2001 4:44 PM
To: [EMAIL PROTECTED]
Subject: RE: BGP question [7:27879]
You have to have IP connectivity to your neighbor before BGP will work.
Static routes
none
line aux 0
line vty 0 4
login
!
end
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Mcfadden, Chuck
Sent: Friday, November 30, 2001 3:21 PM
To: [EMAIL PROTECTED]
Subject: RE: BGP question [7:27879]
Can we see your whole config?
ccie1ab
-Original
I am supprised that no one has explained this in normal terms to you so far.
Here goes. Under normal operation (in your case) BGP will not advertise a
network unless it learns it from an IGP first (in BGP's case it will
consider a static route an IGP route). You can make BGP advertise a network
9 matches
Mail list logo
