>Hello,
>
>We have a Cisco2621 with two T1 going to the same place. Does anyone have a
>link to some IOS examples that would allow them to be bonded together? \
>
>We would like the ability to download at the combined T1 speed of 3 mb.
>Currently we seem to max out at only 1 T1 speed. I did sea
-queue
ppp multilink
multilink-group 1
-Original Message-
From: Howard C. Berkowitz [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 26, 2001 7:14 PM
To: [EMAIL PROTECTED]
Subject: Re: Dual T1 Bonding? [7:13914]
>Hello,
>
>We have a Cisco2621 with two T1 going to the same pla
excerpted below:
"Bandwidth ON Demand Interoperability Group (BONDING)
Bandwidth ON Demand Interoperability Group (BONDING) is used for combining B
channels
together to increase bandwidth. Inverse multiplexing is used to take a
single signal
from a user's equipment and divide the signal into a n
Hi,
You may want to take a look at --
http://www.cisco.com/warp/public/793/access_dial/mpp_serial.html
Please watch the line wrap.
Matt Goodhue wrote:
> Hello,
>
> We have a Cisco2621 with two T1 going to the same place. Does anyone have
a
> link to some IOS examples that would allow them
Please keep in mind that just because you have 2 links to the same provider,
it does not necessarily mean that they are run to the same POP. this can
cause some problems with load balancing 2 different links.
--
Michael Damkot
Technical Trainer
Network Support Engineer II
""Makarand Yerawad
5 matches
Mail list logo