RE: Setting up Lab [7:52708]

2002-09-06 Thread Koh Jeff
thanks guys..great help!!!:) Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52775&t=52708 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [E

RE: Setting up Lab [7:52708]

2002-09-05 Thread Frank Merrill
Check anthonypanda dot com for the DTE/DCE back-to-back cables. There are other sources such as ccbootcamp dot com, and kg2 dor com. And, never forget to check ebay. Just do a search on 'cisco back' and you'll find a ton of them. Good Luck! Message Posted at: http://www.groupstudy.com/form/r

RE: Setting up Lab [7:52708]

2002-09-05 Thread Bryan Brown
Use a DB-60 to DB-60 crossover cable. You can find these all over the Internet and are relatively inexpensive. Configure the clock rate on the serial interface that the DCE side of the cable is connected to. Then, go to town. --- On Wed 09/04, Koh Jeff < [EMAIL PROTECTED] > wrote: Changed your e-m

RE: Setting up Lab [7:52708]

2002-09-05 Thread Reza Sharifi
you can also use a roll over cable to connect 2 routers through the AUX ports. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52735&t=52708 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Re

RE: Setting up Lab [7:52708]

2002-09-04 Thread Larry Letterman
cross over 2 ethernets and set up a subnet between them.. Larry Letterman Cisco Systems [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 04, 2002 7:24 PM To: [EMAIL PROTECTED] Subject: Setting up Lab [7:52708] Hi

Setting up Lab [7:52708]

2002-09-04 Thread Koh Jeff
Hi people, how do i setup a back to back communication between routers? DTE and DCE? Other then using V.35 female to male, is there any other ways? thanks, Jeff Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=52708&t=52708 -- FAQ