Quick question for you all. If you were to break a Frame Relay
connection going into a router by first plugging it into a hub, then
connecting it to the router, for the purposes of plugging a sniffer into
that hub to monitor all frame traffic, would this scenario work or not so
much? Thanks for
Damian [mailto:[EMAIL PROTECTED]]
Sent: Friday, April 27, 2001 10:10 AM
To: [EMAIL PROTECTED]
Subject: Sniffer on a Frame line... [7:2253]
Quick question for you all. If you were to break a Frame Relay
connection going into a router by first plugging it into a hub, then
connecting it to the router
: Sniffer on a Frame line... [7:2253]
Frame over serial? (T1/Ds1/Ds3) They would have to plug into a Network
analyzer with a compatible interface, not a hub. Most hardware network
analyzers have pass-through connections that let you plug through the
analyzer to the router.
Good Luck,
Ejay
-Original
, April 27, 2001 11:25 AM
To: [EMAIL PROTECTED]
Subject: RE: Sniffer on a Frame line... [7:2253]
The RJ45 connection between the DSU/CSU and the wall jack. Would putting a
hub between the two work? Then I could place a sniffer on the hub.
-Original Message-
From: Hire, Ejay [mailto:[EMAIL
-Original Message-
From: Hire, Ejay [mailto:[EMAIL PROTECTED]]
Sent: Friday, April 27, 2001 11:00 AM
To: [EMAIL PROTECTED]
Subject: RE: Sniffer on a Frame line... [7:2253]
Frame over serial? (T1/Ds1/Ds3) They would have to plug into a
Network
analyzer with a compatible interface, not a
e csu.
Not the best one out there but works very well.
Good Luck,
Ben Parrish
-Original Message-
From: John Neiberger [mailto:[EMAIL PROTECTED]]
Sent: Friday, April 27, 2001 11:15 AM
To: [EMAIL PROTECTED]
Subject: RE: Sniffer on a Frame line... [7:2253]
RJ45 does not equal Ethernet. Ar
6 matches
Mail list logo