Hi all,
I was upgrading some 2600's yesterday with new flash and DRAM.
The router boots up into rommon mode correctly. All the TFTP variables are
then set and the code uploaded. Problem is that when the code is finished I
get an error about invalid checksum. Downloaded some new code and same
results.
Eventually, through sheer frustration I tried IOS 11.3 IP only. This worked.
I then reloaded the router for the new code to take effect. I was now able
to upload the IOS 12.2.12 that I was originally trying. Worked perfectly.
Routers are 100% stable.
Anyone else have problems like this??
Andrew Larkins
BCom, CCNP, CCDP
Bytes Technology Networks
A Division of the Bytes Technology Group
A Member of the Altron Group
www.btgroup.co.za
visit the press office @ www.itweb.co.za/office/bytes
Tel : +27 11 800 9336
Fax : +27 11 800 9496
Mobile : +27 83 656 7214
Email : [EMAIL PROTECTED]
OR [EMAIL PROTECTED]
"This e-mail and its attachments may contain information that is
confidential and that may be subject to legal privilege and copyright. If
you are not the intended recipient you may not peruse, use, disclose,
distribute, copy or retain this message. If you have received this message
in error, please notify the sender immediately by e-mail, facsimile or
telephone and return and thereafter destroy the original message.
Please note that e-mails are subject to viruses, data corruption, delay,
interception and unauthorised amendment, and that the sender does not accept
liability for any damages that may be incurred as a result of communication
by e-mail.
No employee or intermediary is authorised to conclude a binding agreement on
behalf of the sender by e-mail without express written confirmation by a
duly authorised representative of the sender.
By transmitting this e-mail message over the Internet the sender does not
intend to allow the contents hereof to become part of the public domain, and
the confidential nature of the contents shall not be altered or diminished
from by such transmission."
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=54856&t=54856
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
