Hi all, I am facing a strange problem with the WS-X5012 ethernet module on the 5500 switch. Cisco TFTP server is installed on a machine with 10/100Mbps ethernet card which is connected to the 5500 switch. This switch has a 10BaseT Ethernet module (WS-X5012) and SupIII supervisor engine.(WS-X5530). I need to copy the CatOS image from the switch to the TFTP server. If I copy the image to a machine connected to the 10/100Ethernet module (WS-X5224) then the copy completes successfully. However If I copy the CatOS image from the switch to the TFTP server installed on a machine connected to the WS-X5012 module (telco connectors) then the operation does not complete successfully.(even though no error is reported either on the switch or on the TFTP server). Ironically If I copy an image from this TFTP server (connected to WS-X5012) to the switch it works fine. Another thing I noticed was that on the WS-X5012 module even though we can set the duplex setting of ports to "full duplex", the ports function normally only if the duplex is set to "half duplex" Thanks and Regards ... _________________________________________________________ For Rs. 2,000,000 worth of Aptech scholarships click below http://events.rediff.com/aptechsch/scholarship.htm Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=14894&t=14894 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]