Has anyone had any luck configuring PPTP terminating on a Cisco router running IOS-FW. I'm having problems with the PPP negotiation part and a Cisco Support engineer told me I had to use MS-chap (ppp authentication ms-chap) in order for it to work. Has anyone used this before without going with Ms-CHAP? Perhaps PAP, or CHAP? On the backend, I'm using a Funk Steel-Belted Radius.. When I try to connect, this is the debug output of the PPP nego, PPP packet, PPP error. Does it seem like it's in the Authentication negotiation stage when the client is not sending out ConfACK? SPR-CLE04OH-01-VPN-DS1# Jun 12 15:50:39: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up Jun 12 15:50:39: Vi1 PPP: Treating connection as a dedicated line Jun 12 15:50:39: Vi1 PPP: Phase is ESTABLISHING, Active Open [0 sess, 0 load] Jun 12 15:50:39: Vi1 LCP: O CONFREQ [Closed] id 6 len 14 Jun 12 15:50:39: Vi1 LCP: AuthProto PAP (0x0304C023) Jun 12 15:50:39: Vi1 LCP: MagicNumber 0x062ECC6E (0x0506062ECC6E) Jun 12 15:50:40: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1 , changed state to up Jun 12 15:50:41: Vi1 LCP: TIMEout: State REQsent Jun 12 15:50:41: Vi1 LCP: O CONFREQ [REQsent] id 7 len 14 Jun 12 15:50:41: Vi1 LCP: AuthProto PAP (0x0304C023) Jun 12 15:50:41: Vi1 LCP: MagicNumber 0x062ECC6E (0x0506062ECC6E) Jun 12 15:50:43: Vi1 LCP: TIMEout: State REQsent Jun 12 15:50:43: Vi1 LCP: O CONFREQ [REQsent] id 8 len 14 Jun 12 15:50:43: Vi1 LCP: AuthProto PAP (0x0304C023) Jun 12 15:50:43: Vi1 LCP: MagicNumber 0x062ECC6E (0x0506062ECC6E) Jun 12 15:50:44: Vi1 PPP: Outbound ip packet dropped, line protocol not up Jun 12 15:50:45: Vi1 LCP: TIMEout: State REQsent Jun 12 15:50:45: Vi1 LCP: O CONFREQ [REQsent] id 9 len 14 Jun 12 15:50:45: Vi1 LCP: AuthProto PAP (0x0304C023) Jun 12 15:50:45: Vi1 LCP: MagicNumber 0x062ECC6E (0x0506062ECC6E) Jun 12 15:50:47: Vi1 LCP: TIMEout: State REQsent Jun 12 15:50:47: Vi1 LCP: O CONFREQ [REQsent] id 10 len 14 Jun 12 15:50:47: Vi1 LCP: AuthProto PAP (0x0304C023) Jun 12 15:50:47: Vi1 LCP: MagicNumber 0x062ECC6E (0x0506062ECC6E) Jun 12 15:50:48: Vi1 PPP: Outbound ip packet dropped, line protocol not up Jun 12 15:50:49: Vi1 LCP: TIMEout: State REQsent Jun 12 15:50:49: Vi1 LCP: O CONFREQ [REQsent] id 11 len 14 Jun 12 15:50:49: Vi1 LCP: AuthProto PAP (0x0304C023) Jun 12 15:50:49: Vi1 LCP: MagicNumber 0x062ECC6E (0x0506062ECC6E) Jun 12 15:50:51: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to dow n Jun 12 15:50:51: Vi1 LCP: State is Closed Jun 12 15:50:51: Vi1 PPP: Phase is DOWN [0 sess, 0 load] Jun 12 15:50:52: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1 , changed state to down thanks guys! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=8289&t=8289 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
