I may be implementing a voice over frame solution in a few weeks and have
started getting up to speed on this stuff. I have been going through many of the
Cisco docs but I have not seen any scenarios similar to mine.
My future setup will be this. A central site 3640 connected to a PBX and 6
remote locations with a Cisco1750-2v. Each remote soho office will have only one
phone connected to the FXS interface.
-------Cisco1750-2v With one phone connected
------Cisco1750-2v With one phone connected
pbx --->Cisco3640-----Frame Relay Wan ------Cisco1750-2v With one phone
connected
-------Cisco1750-2v With one phone connected
-------Cisco1750-2v With one phone connected
I have an unused Pri port in the Cisco3640 already. The PBX is a Northern PBX
with a Pri T1 interface. I am willing to purchase the t1/e1 multiflex Voice card
for the cisco3640 if it makes things easier. Tell me which card is easier to
configure?
I basically want to pass dial tone from the pbx to the remote locations. I want
the remote location phones to look like OPX lines. Can this be done?
Any help or sample configs will be appreciated.
--
John Gesualdi
The Providence Journal Company
Phone (401)277-8133
Pager (401)785-6938
CCDP,CCNP
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
