Please reply to [EMAIL PROTECTED]
I have attached a modem to the serial port (async) of a 1602 (installed
WIC). I can dialup and connect to an AS5300 but can't get any traffic to
cross the link.
Here is the config of the S1
interface Serial1
physical-layer async
ip address negotiated
no ip directed-broadcast
encapsulation ppp
keepalive 10
dialer in-band
dialer idle-timeout 300
dialer map ip XX.XX.XX.XX modem-script dialin system-script login broadcast
XXXXXXX
dialer hold-queue 10
dialer-group 1
async mode dedicated
fair-queue 64 16 0
I have a static route
0.0.0.0 0.0.0.0 serial 1
and a dialer-list
dialer-list 1 protocol ip permit
When I try to ping the address in the dialer map statement, the modem
connects and dials into the AS5300 all looks well with chat scripts, PPP
negotiation and I get an indication that serial 1 is up and line protocol is
up. If I try to do anything using S1, no traffic goes across. Eventually,
the link drops due to the timeout 300 statement.
My thoughts are that no traffic is getting routed through S1 even though I
have a static route. If I try to ping any address other than the one in the
dialer map, nothing happens
Any ideas.
Tony Russell
___________________________________
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.com
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
