The CCNA study guide does a real poor job (as does the cisco command reference) of describing exactly what the difference between mac-address-table restricted and mac-address-table permananet does. Resticted seems to just make sure that only a specific source mac can be plugged into a specific port But permanent seems to route frame with a specific destination mac out a specific interface (or interfaces) Which to me seems like routing, and I'm hard pressed to figure out why you would want to do that statically. Any feedback would be appreciated Thanks Tom Tom Pruneau Trainer Network Operations GENUITY 3 Van de Graff Drive Burlington Ma. 01803 24 Hr. Network Operations Center 800-436-8489 If you need to get a hold of me my hours are 8AM-4PM ET Mon-Fri --------------------------------------------------------------------------- This email is composed of 82% post consumer recycled data bits --------------------------------------------------------------------------- "Once in a while you get shown the light in the strangest of places if you look at it right" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=14498&t=14498 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
