I have 2 Cat 6500's. I can only see mod 1, if I try to switch to any other mod then I get a Pinnacle synch error(see below). I have switched SUP's with another 6500 and I still cannot switch to another MOD. I have a GBIC blade in mod 2 and I have swapped that out with a 48port 10/100 blade, no good. I have tried different slots, either with the GBIC by itself or with the 48port, on both of the chasis, I still cannot see any other mod besides mod 1. >>Any ideas ?? Thanks James 2000 Jul 03 16:42:54 %SYS-3-MOD_MINORFAIL:Minor problem in module 1 Pinnacle Synch Failed. Retries: 4 WARNING: Switching bus not synchronised 2000 Jul 03 16:43:04 %SYS-5-MOD_OK:Module 1 is online ________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com ___________________________________ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]