remove this async dynamic address > use one only> peer default ip address dhcp> > or > peer default ip address pool ip-pool ,,, ip pool ip-pool 192.168.1.2 192.168.1.2 > > use one only ppp callback initiate or ppp callback accept > > add autoselect duriing-login ----- Original Message ----- From: "Sim, CT (Chee Tong)" To: "'Farhan Ahmed'" Cc: Sent: Friday, August 03, 2001 12:46 PM Subject: config for access server to callback PC modem > Hi.. Farhan and Dear all, > > I tried to config for access server to callback PC modem, but it doesn't > work, could you please check for me what's wrong with the config below. > > Sim > > access_server#sh run > Building configuration... > > Current configuration: > ! > version 11.2 > service timestamps debug uptime > service password-encryption > no service udp-small-servers > no service tcp-small-servers > ! > hostname access_server > ! > enable secret 5 $XXXXXXXXXXXXXXXX > ! > username sim callback-dialstring 999999 password XXXXXXXXXXXXXXX > ip host modem1 2001 50.200.100.11 > ip host modem2 2002 50.200.100.11 > ip host modem3 2003 50.200.100.11 > ip dhcp-server 50.200.100.11 > chat-script script "dialout" ABORT ERROR ABORT BUSY "" "AT" OK "ATDT\T" > TIMEOUT 30 CONNECT > \c > ! > interface Loopback0 > ip address 192.198.255.10 255.255.255.255 > no logging event subif-link-status > ! > interface Ethernet0 > ip address 50.200.100.11 255.255.252.0 > no ip directed-broadcast > no logging event subif-link-status > load-interval 180 > ! > interface Serial0 > no ip address > no logging event subif-link-status > no fair-queue > ! > interface Async1 > ip unnumbered Ethernet0 > encapsulation ppp > no logging event subif-link-status > async dynamic address > async mode interactive > peer default ip address dhcp > ppp callback initiate > ppp authentication pap > ! > ip classless > ip route 0.0.0.0 0.0.0.0 50.200.100.1 permanent > logging trap debugging > logging facility local3 > logging 50.200.100.22 > snmp-server community public RO > ! > line con 0 > line 1 > password 7 XXXXXXXXXX > autoselect ppp > script callback dialout > login local > modem InOut > modem autoconfigure discovery > length 0 > transport input all > speed 115200 > flowcontrol hardware > line 2 > location modem2 > no exec > password 7 XXXXXXXX > login > modem InOut > transport input all > speed 115200 > flowcontrol hardware > line 3 8 > line aux 0 > password 7 XXXXXXXXX > autoselect ppp > login local > modem InOut > transport input all > speed 38400 > flowcontrol hardware > line vty 0 4 > no exec > exec-timeout 0 0 > password 7 XXXXXXXXXX > login > ! > end > > access_server# > access_server# > > -----Original Message----- > From: Farhan Ahmed [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, August 01, 2001 5:47 PM > To: 'Sim, CT (Chee Tong)' > Subject: RE: me again > Importance: High > > > > no need > > just replace the command > async mode interactive from dedicated > > autoselect ppp > try > also > autoselect during login > if u have any prob > > Best Regards > > Have A Good Day!! > > ******************************************* > Farhan Ahmed* > MCSE+I, MCP Win2k, CCDA, CCNA, CSE > Network Engineer > Mideast Data Systems Abudhabi Uae. > > ******************************************* > > > > Privileged/Confidential Information may be contained in this message or > Attachments hereto. Please advise immediately if you or your employer do > not consent to Internet email for messages of this kind. Opinions, > Conclusions and other information in this message that do not relate to the > Official business of this company shall be understood as neither given nor > Endorsed by it. > > > > -----Original Message----- > > From: Sim, CT (Chee Tong) [mailto:[EMAIL PROTECTED]] > > Sent: Wednesday, August 01, 2001 10:49 AM > > To: 'Farhan Ahmed' > > Subject: me again > > > > > > Hi.. Farhan, me again > > > > May I ask about your script chat script "dialout" ABORT ERROR > > ABORT BUSY "" > > "AT" OK "ATDT \T" TIMEOUT 30 CONNECT \c > > Do you have to specify the the phone no eg 999999 to callback > > after atdt?? > > > > What it means by sending you "debug ppp negiotation, > > authentication"? Does > > it refer the debug output on my access server when people dial in. > > > > Any configuration need to be done on the WIN98 (mine is > > WIN98) OS and modem > > in order to let access server callback. Do we need to use AT > > command to > > configured the PC's modem??? > > > > Thanks for your help > > Sim > > -----Original Message----- > > From: Sim, CT (Chee Tong) > > Sent: Wednesday, August 01, 2001 1:46 PM > > To: 'Farhan Ahmed' > > Subject: RE: how to configure callback for 2 numbers [7:14121] > > > > > > Farhan, > > > > Thanks you your kind help. I think my access-server IOS version not > > up-to-date is it??? I found my account cannot download IOS > > software. May I > > borrow your account? Or Please let me know how to get a account to > > download? > > > > Sim > > > > access_server#sh ver > > Cisco Internetwork Operating System Software > > IOS (tm) 2500 Software (C2500-I-L), Version 11.2(18)P, > > RELEASE SOFTWARE > > (fc1) > > Copyright (c) 1986-1999 by cisco Systems, Inc. > > Compiled Mon 12-Apr-99 13:29 by ashah > > Image text-base: 0x030241E0, data-base: 0x00001000 > > > > ROM: System Bootstrap, Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE > > SOFTWARE (fc1) > > BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c)XB1, > > PLATFORM SPECIFIC R > > ELEASE SOFTWARE (fc1) > > > > access_server uptime is 38 weeks, 23 hours, 27 minutes > > > > > > -----Original Message----- > > From: Farhan Ahmed [mailto:[EMAIL PROTECTED]] > > Sent: Monday, July 30, 2001 10:34 PM > > To: [EMAIL PROTECTED] > > Subject: RE: how to configure callback for 2 numbers [7:14121] > > > > > > try this > > dont paste > > > > username caller1 callback-dialstring 1111 password caller1 > > username caller2 callback-dialstring 2222 password caler2 > > > > chat script "dialout" ABORT ERROR ABORT BUSY "" "AT" OK "ATDT > > \T" TIMEOUT 30 > > CONNECT \c > > > > interface loopback1 > > ip address 192.168.1.1 > > > > interface group-async 1 > > encapsulation ppp > > ip unnumbered interface loopback1 > > ppp authentication pap > > async mode dedicated > > peer default ip address pool ip-pool > > ppp callback accept > > group range 1 1 > > > > > > ip pool ip-pool 192.168.1.2 192.168.1.2 > > > > line 1 > > modem inout > > no exec > > script callback dialout > > transport input all > > modem autoconfigure discovery > > stopbits 1 > > flow control hardware > > > > > > > > u need to have ios 11.3 2 t or higher > > 4 win95 callback > > > > send me debug ppp negotioation, authentication > > if u have any problem > > let me know > > > > > > Best Regards > > > > Have A Good Day!! > > > > ******************************************* > > Farhan Ahmed* > > MCSE+I, MCP Win2k, CCDA, CCNA, CSE > > Network Engineer > > Mideast Data Systems Abudhabi Uae. > > > > ******************************************* > > > > > > > > Privileged/Confidential Information may be contained in this > > message or > > Attachments hereto. Please advise immediately if you or your > > employer do > > not consent to Internet email for messages of this kind. Opinions, > > Conclusions and other information in this message that do not > > relate to the > > Official business of this company shall be understood as > > neither given nor > > Endorsed by it. > > > > > > > -----Original Message----- > > > From: Sim, CT (Chee Tong) [mailto:[EMAIL PROTECTED]] > > > Sent: Monday, July 30, 2001 1:56 PM > > > To: [EMAIL PROTECTED] > > > Subject: RE: how to configure callback for 2 numbers [7:14121] > > > > > > > > > Yes.. I tried this before, but it come out these errors.. > > > what's wrong??/ > > > > > > > > > access_server(config)#username "sim" password "simiscute" > > > callback-dialstring 999999 > > > % Overly long Password truncated after 25 characters > > > access_server(config)#username sim password simiscute > > > callback-dialstring > > > 999999 > > > % Overly long Password truncated after 25 characters > > > access_server(config)#username sim password simiscute > > > [callback-dialstring > > > 999999] > > > % Overly long Password truncated after 25 characters > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED]] > > > Sent: Monday, July 30, 2001 5:23 PM > > > To: [EMAIL PROTECTED]; Sim, CT (Chee Tong) > > > Subject: RE: how to configure callback for 2 numbers [7:14121] > > > > > > > > > > > > Specify the call back number in the username configuration: > > > > > > username "yourname" password "yourpassword" > > callback-dialstring 888888 > > > username "yourmate" password "hispassword" > > callback-dialstring 777777 > > > > > > CM > > > > > > > > > -----Original Message----- > > > From: "[EMAIL PROTECTED]" on behalf of > > > "Sim, CT (Chee Tong)" > > > Sent: 30 July 2001 08:04 > > > To: "[EMAIL PROTECTED]" > > > Subject: how to configure callback for 2 numbers [7:14121] > > > > > > > > > > > > > ---------- > > > > From: Sim, CT (Chee Tong)[SMTP:[EMAIL PROTECTED]] > > > > Sent: Monday, July 30, 2001 9:04:53 AM > > > > To: [EMAIL PROTECTED] > > > > Subject: how to configure callback for 2 numbers [7:14121] > > > > Auto forwarded by a Rule > > > > > > > Dear all, > > > > > > I want to make my access-server to callback my home phone no > > > 888-888 and my > > > colleage phone no 777-777, once we use these two number to > > dial to the > > > access-server, , after verification, the access server will > > > cut the line and > > > call back, no other number can be callbacked. > > > > > > Part of my config is as follow, Please tell me what else I > > > need to configure > > > in order to make it work. eg callback-dialstring and etc > > > > > > interface Async1 > > > ip unnumbered Ethernet0 > > > encapsulation ppp > > > no logging event subif-link-status > > > async dynamic address > > > async mode interactive > > > peer default ip address dhcp > > > ppp callback accept > > > ppp authentication pap > > > ! > > > line 1 > > > password 7 00059805050058 > > > autoselect ppp > > > login local > > > modem InOut > > > length 0 > > > transport input all > > > speed 115200 > > > flowcontrol hardware > > > > > > > > > > > > > > > ================================================================== > > > De informatie opgenomen in dit bericht kan vertrouwelijk zijn en > > > is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht > > > onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en > > > de afzender direct te informeren door het bericht te retourneren. > > > ================================================================== > > > The information contained in this message may be confidential > > > and is intended to be exclusively for the addressee. Should you > > > receive this message unintentionally, please do not use the > > contents > > > herein and notify the sender immediately by return e-mail. > > > > > > > > > ================================================================== > > > ================================================================== > > > De informatie opgenomen in dit bericht kan vertrouwelijk zijn en > > > is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht > > > onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en > > > de afzender direct te informeren door het bericht te retourneren. > > > ================================================================== > > > The information contained in this message may be confidential > > > and is intended to be exclusively for the addressee. Should you > > > receive this message unintentionally, please do not use the > > contents > > > herein and notify the sender immediately by return e-mail. > > > > > > > > > ================================================================== > > > > [GroupStudy.com removed an attachment of type > > application/octet-stream which > > had a name of Farhan Ahmed.vcf] > > ================================================================== > > De informatie opgenomen in dit bericht kan vertrouwelijk zijn en > > is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht > > onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en > > de afzender direct te informeren door het bericht te retourneren. > > ================================================================== > > The information contained in this message may be confidential > > and is intended to be exclusively for the addressee. Should you > > receive this message unintentionally, please do not use the contents > > herein and notify the sender immediately by return e-mail. > > > > > > ================================================================== > > > > > This message was sent with an attachment which Rabobank International does > not allow because the filetype is not considered to be business related or > it contains "executable" code which could be destructive if run. Please note > the attachment has now been deleted. > > The original header content is included below > > For more information on Attachment stripping see: > > http://i2i.rabobank.com/coc/cces/smtpmail > > > > The following files were deleted: > Farhan Ahmed.vcf > > > ================================================================== > > ================================================================== > De informatie opgenomen in dit bericht kan vertrouwelijk zijn en > is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht > onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en > de afzender direct te informeren door het bericht te retourneren. > ================================================================== > The information contained in this message may be confidential > and is intended to be exclusively for the addressee. Should you > receive this message unintentionally, please do not use the contents > herein and notify the sender immediately by return e-mail. > > > ================================================================== Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=14769&t=14769 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]