As long as your boot rom is ok, you can erase the flash without having to
xmodem a new IOS or config.
After you issue an erase flash: command, reload the router, then it should
boot to the router(boot) prompt At that point, config an IP, a
default route if needed, and issue a no shut on the
I had the same problem (btw 5300 is the same)- You have to erase flash
before copying new file.
RGRDS,
Evgeny
"Jim Bond" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hello,
I copied IOS file to flash memory but got checksum
error. I wanted to delete the
: file can't be deleted on 3640
I had the same problem (btw 5300 is the same)- You have to erase flash
before copying new file.
RGRDS,
Evgeny
"Jim Bond" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hello,
I copied IOS file to fl
problem
- Original Message -
From: Evgeny Babanin [EMAIL PROTECTED]
Newsgroups: groupstudy.cisco
To: [EMAIL PROTECTED]
Sent: Monday, July 03, 2000 1:48 PM
Subject: Re: file can't be deleted on 3640
I had the same problem (btw 5300 is the same)- You have to erase flash
before copying
Hello,
I copied IOS file to flash memory but got checksum
error. I wanted to delete the file but failed. I used
the command "delete flash:x" and got "no such file
or directory" but "show flash" the file is there.
How can I delete the bad flash?
Thanks in advance.
Jim
sqeeze command possibly?
ie. sqeeze filesystem: , purpose is to permanently delete deleted files,
Jim Bond [EMAIL PROTECTED] schrieb in im Newsbeitrag:
[EMAIL PROTECTED]
Hello,
I copied IOS file to flash memory but got checksum
error. I wanted to delete the file but failed. I used
the
Erase your flash and reload. Use x-modem to send the new file down. Dont
forget to change the config reg to 0x3920 and set your term prog to
115200bps
-Brad
"Jim Bond" [EMAIL PROTECTED] wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
Hello,
I copied IOS file to flash memory
7 matches
Mail list logo