Hello Can anybody tell me any mistake or missing configuration for frame relay traffc shaping? I connected two cisco 2600 router serial interfaces throug 32 k link. I configured point to point frame relay subinterface on both interfaces. I want to use this link on CIR 16k and peak rate 32k.
My configuration is On interface frame-ralay traffic shaping and on subinterface frame-relay class cisco and for map-class map-class frame-relay cisco frame-ralay traffic-rate 16000 32000 frame-relay adaptive-shaping becn and I also tried map-class frame-relay cisco frame-ralay cir 16000 frame-relay bc 2000 frame-relay be 2000 frame-relay adaptive-shaping becn Problem is that when I run data on line e.g. file transfer, bandwidth uses always 16k or less although no other data run on ckt and total available bandwidth is 32 k. The data rate does not reach to peak rate and if I remove traffic shaping then total 32 k used. Is any missing parameter or command in above configuration? regards Khurrum -- _______________________________________________ Sign-up for your own FREE Personalized E-mail at Mail.com http://www.mail.com/?sr=signup Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44394&t=44394 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]