Dear All I have a ISDN pri line ( 30 channels ) terminated on cisco 2610 routers. I have 14 other remote loactions which are having cisco 1750 routers and having bri lines. I want to make a connectivity between isdn bri lines and pri lines by dialing out from bri to pri lines. Since pri has 30 channels so i should be able to use 14 channels at a time if i ahve 14 remotes dialing in. I want to make this connectivity over frame relay . Over pp by enabling multilink pp, it works for me but not over frame relay. I tried configuring pri router in 2 ways . one by maiking dialer rotary group and then respective dialer interface, And in that dialer i/f i defined multiple ip address and multiple dlci no. In thci configuration i am able to dial into pri from any one of the remote at a time. But i am unable to dial in from 2nd bri if 1st is allready connected. Remote is rejecting this call.
Secondly i tried same by creating dialer pool member. I made a single dialer pool member and inserted that dialer pool into dialer i/f on which i had multiple ip addresses and dlci no. but in that i am able to make my all the channels up at a time but ping doesn't work from one bri to pri i/f. It says encapsulation failed. I tried this by making multiple dialer pool members and multiple dialer i/f, I mapped this dialer pool with respective dialer i/f which belong to a unique dlci no and ip address. But in tis config i am not even to dial into pri from single bri. Pri router always reject the call. How can i resolve this issue, It will be really graeat it some one can share configuration too. Thanx in advance Regards Lokesh Khanna Engineer- IDC (Network Integration) Internet Services Group Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=55552&t=55552 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]