Hi folks, I am CCNP just moving into a primary lucent
environment. I am wondering if anybody has any
training notes or configs on Lucent STINGER DSLAM
products.
Lucent documentations are very rare, any help will be
appreciated.
particularly any CBT's.
Richard Steer CCNA
I believe many folks here are from INS which is Lucent
now, they have access to their internal network for
those docs, but for outsiders I do not know where we
can go, it is strange for Lucent that they keep all
those infor as they are secerts? It is really
unbelievable, especially compared with
I've been offered a Cisco position as a systems engineer at Lucent
Worldwide Services.
Anyone have any experience with these guys ?
Jacques Danzaz
[EMAIL PROTECTED]
_
Get Your Private, Free E-mail from MSN Hotmail at
Hi All :
I've problem in Xidia bandwidth management.
I use the brick program to test the traffic(limit 2M)in xidia.
When turn the ip-fragment-max-siza over 14380 After,
the bandwitdh with drop to 0.333m. Can you tell me
other setting can fixed this problem.
_
FA
Check the URL
http://www.lucent-networkcare.com/scripts/registration/registeruser.asp?regtypeid=29
Please watch the wrap.
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ, list archives, and subscription info: http://www.groupstudy.
Hi router gurus,
I am sorry That I am talking about off topic about lucent
ap600(g.703).Ihave this router but my e1 is not geting up our service
provider have unframed network and this is a fractional router i have
tried ti enable 1-32 ime slot but no luck .Can some body help me how can
i
Hi colleagues,
I have a question regarding a frame relay connection that goes through a
Lucent/Ascend B-STDX 9000 switch. There are certain configurable parameters
on the switch, and I wonder if there are matching parameters on Cisco
routers for those:
B-STDX 9000Cisco
Lmi
Good stuff, always concerned about the security of my posters...
Andy
- Original Message -
From: Makarand Yerawadekar <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, June 07, 2000 8:38 AM
Subject: Free Poster:Security, From Lucent
>
> Check the URL
>
Thanks!
Mike
Makarand Yerawadekar <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
>
> Check the URL
>
>
http://www.lucent-networkcare.com/scripts/registration/registeruser.asp?regt
ypeid=29
>
> Please watch the wrap.
>
>
> ___
> U
Thought this might be of interest to some on the list. It would seem as if
Lucent is really trying to drum up participation in this seminar. This is
one of the 11 almost identical emails about it that I had this morning!
One wonders how a company can make complex networking products when they
I was just wondering if anyone has any documentation or experience
configuring the Lucent CBX500 with a Cisco 3600. Any info will
be appreciated.
Thomas Carter
[EMAIL PROTECTED]
___
UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html
FAQ
Hello Folks,
Any one got idea about above comparison?
Rgds,
Steiven
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20954&t=20954
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report m
Please, if you have info about the site where I can download Lucent qip
subnet calculator,I will appreciate it very much.I know it was posted to the
group sometimes last year but lost the address to the site.
Will really appreciate any info to the sitethanks in advance.
anthony iyoha
Hi Guys/dolls
I've got a problem whereby Im connecting a cisco router with a lucent
router via a 128kb line. I've configured the serial interface on the
cisco router with Encap PPP and also on the Lucent router.When I show
the interface, I get the "Line up protocol up" state
I try to connect ISDN PRI from quad Chann E1 AS5300 to DS1 Lucent PBX
For Days, I can not make the Signalling up. On PBX they have parameter
such as
1. Country Protocol : 1 - 22, or ETSI
2. Protocol Version : a or b
3. Interface Companding : alaw or mulaw
4. Idle Code : 8 bit : 0x00 until 0xFF
Steiven,
I've been looking at the Avaya/Lucent product vs. Cisco too. There was a
review done in Mobile Computing August 2001 issue. For what it's worth they
liked the Cisco. I know for a fact that the Avaya product is what one of the
local vendors is rolling out. I've spoken
I don't know about the Lucent stuff, but I installed some Cisco Aironet 340
series equipment last summer (99), and I have not had one trouble call at
all. These are used constantly for classes and haven't had one probem. In
fact I almost forgot we had them installed. You can&#
Is both work with Linux OS?
Steiven
- Original Message -
From: "netman"
To:
Sent: Tuesday, September 25, 2001 8:21 PM
Subject: Re: Cisco Aironet vs Lucent ORiNOCO [7:20954]
> I don't know about the Lucent stuff, but I installed some Cisco Aironet
340
> series
It works via IP addresses...so yes.
- Original Message -
From: "Steiven Poh-(Jaring MailBox)"
To:
Sent: Tuesday, September 25, 2001 9:03 AM
Subject: Re: Cisco Aironet vs Lucent ORiNOCO [7:20954]
> Is both work with Linux OS?
>
> Steiven
>
>
>
>
5, 2001 5:43 PM
To: [EMAIL PROTECTED]
Subject: Re: Cisco Aironet vs Lucent ORiNOCO [7:20954]
It works via IP addresses...so yes.
- Original Message -
From: "Steiven Poh-(Jaring MailBox)"
To:
Sent: Tuesday, September 25, 2001 9:03 AM
Subject: Re: Cisco Aironet vs Lucent ORiNOCO
rofl...my badI thought it said Arrowpoint...not Aironet. *slap self*
- Original Message -
From: "Murphy, Brian J SITI-ISET-31"
To: "'Allen May'" ;
Sent: Tuesday, September 25, 2001 10:43 AM
Subject: RE: Cisco Aironet vs Lucent ORiNOCO [7:20954]
Start looking at some of the added Aironet features. Such as LEAP for
dynamic WEP keys. Also the Aironet cards do WEP in hardware, while the
Lucent cards use the PC's processor for doing WEP, this can cause some
latency and thruput issues. Also take a look at the Air Snort documentation,
it
To: [EMAIL PROTECTED]
Subject: Re: Cisco Aironet vs Lucent ORiNOCO [7:20954]
rofl...my badI thought it said Arrowpoint...not Aironet. *slap self*
- Original Message -
From: "Murphy, Brian J SITI-ISET-31"
To: "'Allen May'" ;
Sent: Tuesday, September
e I can download Lucent qip
>subnet calculator,I will appreciate it very much.I know it was posted to the
>group sometimes last year but lost the address to the site.
>Will really appreciate any info to the sitethanks in advance.
>
>anthony iyoha
_
F
gt; jas
>
> At 05:53 PM 1/19/01 +, Anthony Iyoha wrote:
> >Please, if you have info about the site where I can download Lucent qip
> >subnet calculator,I will appreciate it very much.I know it was posted to
the
> >group sometimes last year but lost the address to the si
Check your routing.
""Marakalas"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi Guys/dolls
>
> I've got a problem whereby Im connecting a cisco router with a lucent
> router via a 128kb line. I've configured the serial inter
what about layer 3 man!!!
-Original Message-
From: Marakalas [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, 8 May 2001 12:02 PM
To: [EMAIL PROTECTED]
Subject: Connect Cisco 2501 to Lucent Router [7:3559]
Hi Guys/dolls
I've got a problem whereby Im connecting a cisco router with a l
Connect Cisco 2501 to Lucent Router [7:3559]
> Hi Guys/dolls
>
> I've got a problem whereby Im connecting a cisco router with a lucent
> router via a 128kb line. I've configured the serial interface on the
> cisco router with Encap PPP and also on the Lucent router.When I
You get anywhere with this, are there filters on the lucent? Is this a
portmaster?
Brian "Sonic" Whalen
Success = Preparation + Opportunity
On Tue, 8 May 2001, Vivek Singh wrote:
> what about layer 3 man!!!
>
>
>
> -Original Message-
> From: Maraka
29 matches
Mail list logo
