Please provide following debug with mlppp configs while pinging : - debug ppp mu frag - debug ppp mu eve - debug ip pac de - debug ip icmp
& - show ver - show run. - show ip route thanks, rahul. ""Cisco Nuts"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello, > Have 2 routers connected back-to-back via 2 serials with ppp encap and ppp > multilink cmds. configed on both. This creates a virtual intf. > Virtual-Access 1. I can ping to networks on both routers via this virtual > intf. but I cannot ping the serial ip's itself. Is this how this is > supposed to work? I mean, how come I cannot ping the serial ip when this > very same serial intf. gets me to networks on that router? > Thank you. > > Output: > > Central#ping 20.20.20.1 --------> netw. on the other router > Type escape sequence to abort. > Sending 5, 100-byte ICMP Echos to 20.20.20.1, timeout is 2 seconds: > !!!!! > Success rate is 100 percent (5/5), round-trip min/avg/max = 28/28/28 ms > > Central#ping 5.5.5.1 ---------> the serial ip on the other router > Type escape sequence to abort. > Sending 5, 100-byte ICMP Echos to 5.5.5.1, timeout is 2 seconds: > ..... > Success rate is 0 percent (0/5) > > With the ppp multilink cmd. removed: > Central#ping 5.5.5.2 > Type escape sequence to abort. > Sending 5, 100-byte ICMP Echos to 5.5.5.2, timeout is 2 seconds: > !!!!! > Success rate is 100 percent (5/5), round-trip min/avg/max = 72/76/84 ms > Central# > > Any ideas. Thank you. > > > _________________________________________________________________ > MSN Photos is the easiest way to share and print your photos: > http://photos.msn.com/support/worldwide.aspx Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36553&t=36549 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]