I am looking for some advice on where to go with a config I am working on. This config is lab number 8 in the "All-in-one CCIE Lab study guide". I am setting up snapshot routing between two routers that use ISDN BRIs to connect. One router is setup as the client using the snapshot client 5 8 dialer command and the other is the server using the snapshot server 5 command. I have configured the dialer map snapshot command and the client successfully dials and connects to the server and while they are connected, RIP routing updates are exchanged. While they are connected, the ip routing table shows the routes learned via RIP and everything looks ok. When the routers enter the quiet period, the RIP routes only stay in the routing table for about 3-4 minutes and then vanish. It is my understanding that when configured for snapshot, the routing table should be frozen during the quient period (8 minutes). Why are the RIP routes vanishing from the table? Also, the information I have on snapshot routing tells me that snapshot routing doesn't work with ppp multilink. However, when I went to the cisco site for a snapshot routing config, their sample config uses the ppp multilink command. Does anyone know for a fact that snapshot routing will/will not work with ppp multilink? How about 2 B channels? When I use the dialer load threshold command to bring up the second B channel, the snapshot config doesn't work. Should it? Tony Russell Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=4644&t=4644 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]