one more rookie question :) is there a way to add a pause on my dialer map statement between the pic code and the number? thanks! > From: "beth shriver" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Saturday, January 13, 2001 11:27 AM > Subject: troubleshooting isdn dial in > > > > If i do a sh isdn status and get the following:The > > current ISDN Switchtype = basic-ni1 > > ISDN BRI0 interface > > Layer 1 Status: > > ACTIVE > > Layer 2 Status: > > TEI = 96, State = > MULTIPLE_FRAME_ESTABLISHED > > TEI = 97, State = > MULTIPLE_FRAME_ESTABLISHED > > Spid Status: > > TEI 96, ces = 1, state = 5(init) > > spid1 configured, no LDN, spid1 sent, > > spid1 valid > > Endpoint ID Info: epsf = 0, usid = 61, > tid > > = 1 > > TEI 97, ces = 2, state = 5(init) > > spid2 configured, no LDN, spid2 sent, > > spid2 valid > > Endpoint ID Info: epsf = 0, usid = 5, > tid > > = 1 > > Layer 3 Status: > > 0 Active Layer 3 Call(s) > > Activated dsl 0 CCBs = 1 > > CCB: callid=0x0, sapi=0, ces=1, B-chan=0 > > Total Allocated ISDN CCBs = 1 > > > > > > but when i do a show dialer all call attempts show > > FAILURE .... would this point towards problem with > > isdn line??! > > > > please help! > > Beth > > > > > > __________________________________________________ > > Do You Yahoo!? > > Get email at your own domain with Yahoo! Mail. > > http://personal.mail.yahoo.com/ > > > > _________________________________ > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to > [EMAIL PROTECTED] > > __________________________________________________ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/ _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
