You can directly open your tty from the OS X terminal:
screen /dev/tty.DEVICE 9600
cheers,
michel
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Noah Garrett
Wallach
Sent: Friday, November 21, 2008 12:10 AM
To: Jen Linkova
Cc: cisco-nsp@puck.nether.net
Michael Jager wrote:
To simplify troubleshooting, I'd like traffic flow between the access
layer and the core to be as symmetric as possible. So, at steady state,
the core will forward packets to 10.1.1.0/24 via agg1, and packet to
10.1.2.0/24 via agg2.
You can achieve this to a limited
randal k wrote:
Hive Mind,
I have a customer who started selling a landed a largish VPN contract
for people all over the world. Since then, he pushes about 40mbps of
IPSec traffic, which is growing steadily. Around the same time I
noticed that CPU usage on the distribution 3550 that he is
Hi,
On Thu, Nov 20, 2008 at 02:15:15PM -0700, randal k wrote:
The process is always IP Input. I'm pretty confident that it is IPSec
traffic, as this customer's traffic is overwhelmingly the VPN tunnels;
my 3550's CPU graph is an exact copy of his interface's traffic graph.
something is weird.
Hi,
1. Is it possible to use the IOS of Cisco-3845(ver 12.4) on
Cisco-3600 that is currently running IOS ver 12.2 ???
2. Is the Cisco IOS specific to the series or can be used
across different models?
Cheers,
Ambi
___
cisco-nsp mailing list
Hi,
On Fri, Nov 21, 2008 at 11:55:46AM -, ambedkar wrote:
1. Is it possible to use the IOS of Cisco-3845(ver 12.4) on
Cisco-3600 that is currently running IOS ver 12.2 ???
No.
2. Is the Cisco IOS specific to the series or can be used
across different models?
Yes, no.
gert
--
Hi,
On Thu, Nov 20, 2008 at 01:27:18PM -0800, Eric Cables wrote:
Out of curiosity, what app are people using w/ OSX to console into
Cisco gear?
screen
(And yes, I didn't know that either, but you can do screen /dev/ttyPL...
to get it to do serial console stuff for you)
gert
--
USENET is
See the in-lines.
--raymondh
On Nov 21, 2008, at 7:55 PM, ambedkar wrote:
Hi,
1. Is it possible to use the IOS of Cisco-3845(ver 12.4) on
Cisco-3600 that is currently running IOS ver 12.2 ???
No.
2. Is the Cisco IOS specific to the series or can be used
across different models?
Dears,
If I need to advertise the ip address which I got from the remotly DHCP
server(connected on another subnet) using the IP helper-address server IP. How
to do the advertisement the client is on a switchport interface with the
interface vlan SVI enabled?
Do I have to configure an IP
Dears,Iam trying to configure VPLS on 6509 with SUP-720, is there a limitation
on the modules which support VPLS. The xconnect is configured on interface vlan
for the giagethernet port.IS there any solution to get the vfi UP?Thank you
___
On Thu, Nov 20, 2008 at 04:53:25PM +, Phil Mayers wrote:
All,
In case people are interested, I have tested a load of stuff as working
on 12.2(33)SXI.
http://cisco.cluepon.net/index.php/Ios_sxi
Just tested DOM support on SXI. Here are the findings:
1) much more accurate static
Suzan S. wrote:
Dears,Iam trying to configure VPLS on 6509 with SUP-720, is there a
limitation on the modules which support VPLS. The xconnect is
configured on interface vlan for the giagethernet port.IS there any
solution to get the vfi UP?Thank you
VPLS requires WAN cards i.e. SIP-400.
Hi,
On 20.11.2008, at 22:56, Andrew Gristina wrote:
Minicom- although the prolific driver on OS X doesn't correctly send a
break right now...
serious problem. I've thought about moving to another usb-serial
dongle, but instead I run linux in a vm.
The solution is easy: use the pl2303-osx
Hello guys,
I am trying to get a 3620 configured with 4 of the WIC-1ADSL cards. I have
gone through the Software Adviser on the Cisco site to see if it might
give me any clues as to what carrier card, (NM-1E2W, NM-1FE2W, etc), would
work. None of them seem to allow me to choose the ADSL WIC cards
Hello Randal:
-Original Message-
From: [EMAIL PROTECTED] [mailto:cisco-nsp-
[EMAIL PROTECTED] On Behalf Of randal k
Sent: Friday, November 21, 2008 9:56 AM
To: cisco-nsp@puck.nether.net
Subject: Re: [c-nsp] 3550 CPU Usage IPSec
Excuse my typo, my original answer of IP Input was
Hopefully someone here can provide some insight into the problem I'm seeing..
I recently tried to migrate a remote site from one WAN interface to
another (Serial0/0/0 - Fast0/1 -- shared Eth handoff), and ran into
problems where the NHRP mapping would never update. The remote
router, an 1800,
Sorry for the Off-topic request. I am developing an RFP for a 600 MPLS
circuit contract and I have the technical requirements and infrastructure
discovery pieces covered however RFP discovery around the provider's SLA
structure, tracking, credits, etc is lacking. Anybody have some rock solid
I am trying to get a 3620 configured with 4 of the WIC-1ADSL cards. I have
gone through the Software Adviser on the Cisco site to see if it might
give me any clues as to what carrier card, (NM-1E2W, NM-1FE2W, etc), would
work. None of them seem to allow me to choose the ADSL WIC cards once I
Greetings,
This is a quick question about HSRP. I have two 3560's that do HSRP for
customers in VLANs. This is for public IP space. Is there a way to use
another network to do the HSRP in the interest of preserving the public
IPs? This network would presumably be an RFC1918 net.
-Jason
Nick Voth [EMAIL PROTECTED] writes:
I am trying to get a 3620 configured with 4 of the WIC-1ADSL cards. I have
gone through the Software Adviser on the Cisco site to see if it might
give me any clues as to what carrier card, (NM-1E2W, NM-1FE2W, etc), would
work. None of them seem to allow me
Burton,
There is already ~150mbps of other traffic flowing through this
switch, all of which generates approximately zero CPU, which is how it
looks for 11 other active 3550s, all pushing hundreds of mbps; they're
extremely good at high pps layer 3 with very little CPU usage. Yes,
cef is on
On the 4948 the last four ports are mixed mode copper or SFP. You need to
set media-type.
http://www.cisco.com/en/US/docs/switches/lan/catalyst4900/4948/05modcfg.html
#wp1031564
David
--
http://dcp.dcptech.com
-Original Message-
From: [EMAIL PROTECTED] [mailto:cisco-nsp-
[EMAIL
On Thu, Nov 20, 2008 at 09:01:46PM +0800, adrian kok wrote:
Hi All
I use the USB to serial and serial to console to cisco
switch
It have to reboot switch to have signal but not good
Sounds like your USB dongle is crud. Try a different one?
Keyspan seems to be rock-solid and works just
On Thu, Nov 20, 2008 at 01:27:18PM -0800, Eric Cables wrote:
Out of curiosity, what app are people using w/ OSX to console into
Cisco gear? I've been using ZTerm, but thought I'd pose the question
in case there was a better app out there that I hadn't tried.
I like kermit from within
24 matches
Mail list logo
