Hello guys n gals,
Honestly , this is coffee number 4 , and I hate decaf.
I have a proposal to write at uni and obviously I want it related to
Cisco networking. I was thinking something on monitoring and
management systems. Any ideas thrown at me are more than welcome.
Regards,
Mario A. Spinthir
Is there any way to configure private vlan on a trunk port? I've been searching
on a way to use the private vlan on dot1q port but the command ""switchport
mode private-vlan trunk" is only supported on Cisco Catalyst 4500 series. why
it is not supported on Cisco ME3750 series switch and what cou
On (2008-11-28 18:07 +0200), Tassos Chatzithomaoglou wrote:
> Just to add (if i remember right) that ES and SRB didn't support local VLAN
> significance under single tagged subifs.
> I haven't checked if SRD and/or ES+ solve this problem.
ES+ does solve the issue indeed, but you're still limited
Hi,
On Fri, Nov 28, 2008 at 07:52:23AM -0800, Mark Tech wrote:
> Is there anyway around this? I want the 7600 to act like a router, not a
> switch!
In that case, buy a router, not a switch...
The upside is that the 7600 can do proper ether channels - so if you
just want to distribute traffic fo
Just to add (if i remember right) that ES and SRB didn't support local VLAN
significance under single tagged subifs.
I haven't checked if SRD and/or ES+ solve this problem.
--
Tassos
Tassos Chatzithomaoglou wrote on 28/11/2008 18:01:
You're looking for "local VLAN significance".
You probably
You're looking for "local VLAN significance".
You probably have to get one of the WAN-style (ES20/40 for sure, don't know for
SIP/SPA) cards.
--
Tassos
Mark Tech wrote on 28/11/2008 17:52:
Hi
With my GSR, I can split traffic on seperate physical interfaces, reusing the
same vlan #, i.e.
int
Hi
With my GSR, I can split traffic on seperate physical interfaces, reusing the
same vlan #, i.e.
interface GigabitEthernet0/0/6.2
encapsulation dot1Q 2
ip address 7.7.7.1 255.255.255.252
no ip directed-broadcast
no cdp enable
!
interface GigabitEthernet0/0/7.2
encapsulation dot1Q 2
ip add
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Arie,
Is "maximum-path eibgp" a good command for this?
For multipath eibgp paths to be installed AS-PATH should be the same
(not only the length of path vector -
[http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094431.shtml#bgpm
I wrote a simple perl script a while back to dynamically generate MRTG
"configmaker" style files from routers using these OIDs , check out
http://www.convergence.cx/scripts/qosmaker.gz
Dave.
Eric Cables wrote:
> We have a number of large MQC policies, and I'd like to graph the
> throughput of ea
I m thru.
Thanks
Ronnie
On Thu, Nov 27, 2008 at 5:58 AM, Joerg Mayer <[EMAIL PROTECTED]> wrote:
> On Thu, Nov 27, 2008 at 03:28:38AM -0800, Hitesh Vinzoda wrote:
> > Does that tftp server need to be of the same subnet for which i had one
> for
> > IPS or nothing to be done.
>
> That tftp-server
On Fri, 2008-11-28 at 05:26 +, ambedkar wrote:
> 106_6509_CAT_1> sh vtp domain
> Version : running VTP1 (VTP3 capable)
> Domain Name : 106 Password : not
> configured
> Notifications: disabled Updater ID:
> 10.200.10.253
Who is 10.2
11 matches
Mail list logo