http://www.cisco.com/web/partners/downloads/765/tools/quickreference/voiceden
sity.pdf
On Wednesday, 24 December, 2008 22:17 L'argent <> wrote:
> I'm looking for a small box, pref Cisco, that will take 23 channels of
> VOIP and hand it off as a PRI suitable for use in a Norstar/Meridian
> phone
>>Thanks for the quick reply. I am running 12.2(18)SXF10a , "test mcast ltl
>>index " doesn't seem to work.However in this case I could find the >interface
>>number since I know where the was CSS connected. Can you guide me find the
>>index number someotherway.?
Take care to note that the "test
I stated that wrong, the old router does not need to do VRFs...
It just needs to do VLAN's.
Derick Winkworth wrote:
> If security is an issue, put any old router in that will do VRFs and
> configure it with IOS FW or ACLs... You can put an IOS FW "on a stick" with
> VLAN's going to it...
>
>
If security is an issue, put any old router in that will do VRFs and configure
it with IOS FW or ACLs... You can put an IOS FW "on a stick" with VLAN's going
to it...
Or put an actual firewall in place...
From: "Ramcharan, Vijay A"
To: cisco-nsp@puck.nether
1841 doesn't do voice. (It has no DSP's)
28xx surely will do the trick, and also 2600XM with NM-HDV2-1T1/E1.
Martin
On Wednesday, 24 December, 2008 22:17 L'argent <> wrote:
> I'm looking for a small box, pref Cisco, that will take 23 channels of
> VOIP and hand it off as a PRI suitable for use
IAD-2431-2T1E1... Has 2xFE 2xT1 can do all sorts of stuff.. Works
great for this...
--
Tim
On 12/24/08, L'argent wrote:
>
> I'm looking for a small box, pref Cisco, that will take 23 channels of
> VOIP and hand it off as a PRI suitable for use in a Norstar/Meridian
> phone system. [transparent S
L'argent wrote:
I'm looking for a small box, pref Cisco, that will take 23 channels of
VOIP and hand it off as a PRI suitable for use in a Norstar/Meridian
phone system. [transparent SIP gateway basically -- pass through caller
id/name/etc] I believe a ISR 1841 can do it, but I'm not 100%.
I'm looking for a small box, pref Cisco, that will take 23 channels of
VOIP and hand it off as a PRI suitable for use in a Norstar/Meridian
phone system. [transparent SIP gateway basically -- pass through caller
id/name/etc] I believe a ISR 1841 can do it, but I'm not 100%.
Anyone been here/
Give each VRF a rd, and do an import/export of that rd. Configure BGP, don't
even need to use it as your routing protocol. Each VRF should automagically
have the address family configured. Now under the ip vrf configuration
import the other VRF's rd. Now you have reachability at one location.
Anoth
I've read the doc at
http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_vrf
_aware_ipsec_ps6350_TSD_Products_Configuration_Guide_Chapter.html#wp1027
175 and ignoring the restriction about mapping VRF to VRF traffic have
tried (unsuccessfully) to circumvent this restriction.
Is i
adrian kok wrote:
> Hi
>
> How can I empty the cache in ASA?
Do you mean ARP cache? Have you tried "clear arp"?
-garry
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.neth
Hi
How can I empty the cache in ASA?
I transfer the ip from one server to other server, but
the ASA is still only reconizing in the old server
Thank you
Send instant messages to your online friends http://uk.messenger.yahoo.com
___
cisco-nsp mailin
On Thu, Dec 18, 2008 at 11:55:01AM +0100, Marcus.Gerdon wrote:
> Hi @All,
>
> what information I got regarding AS32 is somewhat worrysome:
>
> 12.0(32)S12 Q4/2008
> for 72 & GSR
>
12.0(32)S12 is out as of yesterday with support for 4-byte AS on GRP and PRP
http://www.cisco.com/e
Hi All
MPLS Lable Untag removes all labels from MPLS packets and sent it as native
IP packet
my question is packets with untag label will be sent over IP interface not
MPLS interface and FIB lookup occur prefixes with this tag ?
best regards
--Ibrahim
_
Thanks for the quick reply. I am running 12.2(18)SXF10a , "test mcast ltl
index " doesn't seem to work.However in this case I could find the interface
number since I know where the was CSS connected. Can you guide me find the
index number someotherway.?
Here is what I did to find out.
bbr00m1#*s
Issu should be supported in the SXI release, but haven't verified that
yet in real life (no other release yet to upgrade to)
About production experience: no real show-stoppers so far (besides the
upgrade/downtime one, which issu should solve), just remember that
mpls isn't supported (yet?)
Best r
Looking for some real world input here so coming to the pro's. Anyone using
6500's with VSS implemented? Looking for people's feedback who are using it
in production. I had heard awhile back that there are issues with support
for ISSU, is this still the case? Just looking for some pro's and con's.
http://www.sins.com.au/nmis/
El mar, 23-12-2008 a las 23:07 +0530, Aman Chugh escribió:
> Hello List,
>
> I am looking for a tool for consolidating all my devices in my lab in
> differrent racks and which should act like a database of all my devices with
> infomation about the IOS code and softwa
Thilak,
Try running this command:
Router-sp#test mcast ltl index ef
index 0xEF contain ports 4/48
(in your case change ef with 2e)
Arie
-Original Message-
From: cisco-nsp-boun...@puck.nether.net
[mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Thilak T
Sent: Wednesday, December
Hello
Can anyone please guide me to understand how to find out physical interface
to DEST_INDEX mapping. I did a elam capture to trave a IP packet going to a
CSS VIP.
RBUS data:
SEQ_NUM [5] = 0x17
CCC [3] = b100 [L3_RW]
CAP1
20 matches
Mail list logo