Re: [c-nsp] High CPU caused by interupt on 7600 router

2010-10-01 Thread Benjamin Lovell
ELAM captures only one packet at a time so it's not as useful for figuring out what packets are causing high CPU. An RP-inand SPAN will be much better. Once you find out which packets are going to the CPU and you think that maybe those packets should not have hit the CPU then ELAM could be usefu

Re: [c-nsp] High CPU caused by interupt on 7600 router

2010-10-01 Thread Phil Mayers
On 01/10/10 16:24, Rin wrote: Hi Phil, Thanks for your email. Below is my answer: Do you have any CoPP or MLS limiters enabled? I am thinking particularly the TTL and MTU ones. The CPU only spikes in less than a minute show I cannot catch it when it high. I had CoPP applied as below Since

Re: [c-nsp] can I use | pipe line such as "| inc xxx" and regexp such as "regexp ^$" both , when I execute "show bgp "

2010-10-01 Thread Mark Tinka
On Friday, October 01, 2010 10:48:57 pm Per Carlson wrote: > The CRS-1 isn't *that* new any more. I know, I meant in terms of its evolution from a core to a peering to an edge platform. Not just the CRS, but also IOS XR. It's been around a while, but still making in-roads and still developing

Re: [c-nsp] High CPU caused by interupt on 7600 router

2010-10-01 Thread Rin
Hi Ozgur, I saw TAC engineer do ELAM capture once but not understand much. Is there any documentation about ELAM capture? For CPU Profiling, do you mean this documentation? http://www.cisco.com/en/US/products/hw/routers/ps359/products_tech_note09186a00801c2af0.shtml#cd It seems that CPU Profili

Re: [c-nsp] High CPU caused by interupt on 7600 router

2010-10-01 Thread Rin
Hi Phil, Thanks for your email. Below is my answer: > Do you have any CoPP or MLS limiters enabled? I am thinking particularly the TTL and MTU ones. The CPU only spikes in less than a minute show I cannot catch it when it high. I had CoPP applied as below

Re: [c-nsp] Service agreement warning for EOL hardware

2010-10-01 Thread Lukasz Bromirski
On 2010-10-01 11:06, Asbjorn Hojmark - Lists wrote: Last Date of Support for the 3640 was November 2007. It is correct that you could extend an existing contract or buy a new one November 2006... but you couldn't do that for 5 years, only 1 because EoL (LDoS) was November 2007. I can't go into

Re: [c-nsp] can I use | pipe line such as "| inc xxx" and regexp such as "regexp ^$" both , when I execute "show bgp "

2010-10-01 Thread Per Carlson
Hi Mark. >> features when using "show bgp ...". > > There's a number of things they don't have, and this is to > be expected for a box that is still fairly new on the scene. The CRS-1 isn't *that* new any more. > And someone else already mentioned, 3.8 brought with it some > BGP switches that ca

[c-nsp] Is GLC-FE-100LX= really unsupported?

2010-10-01 Thread Sascha Pollok
Hello people, Cisco lists the GLC-FE-100LX= SFP as unsupported for several switches like most Catalyst 3560. However, they say it is supported in small 8PC and 12PC boxes. Does anyone know for sure that it is not working in e.g. Cat 3560-24TS switches? I am surprised that Cisco lists the GLC-FE-

Re: [c-nsp] traffic policing on 7600

2010-10-01 Thread Jiří Procházka
Thomas, Cory, thats exactly function I was looking for! Thank you for hint, service-policy with aggregated policer is now set on all vlans a traffic is policed as I needed. Kind regards, Jiri Prochazka - Original Message - From: "Thomas Habets" To: "Jiří Procházka" Sent: Fri

Re: [c-nsp] High CPU caused by interupt on 7600 router

2010-10-01 Thread Ozgur Guler
Try ELAM capture... TAC can help with the ELAM or CPU profiling. -Ozgur - Original Message From: Rin To: cisco-nsp@puck.nether.net Sent: Fri, 1 October, 2010 10:34:08 Subject: [c-nsp] High CPU caused by interupt on 7600 router Hi group, I have a 7609 PE router with 2 TenGigabit int

Re: [c-nsp] High CPU caused by interupt on 7600 router

2010-10-01 Thread Phil Mayers
On 01/10/10 10:34, Rin wrote: PE-Router#sho proc cpu sort 5min CPU utilization for five seconds: 1%/1%; one minute: 3%; five minutes: 6% The CPU is low at this point; you need to catch it when it's high. I followed the troubleshooting high CPU Utilization Guide but still cannot detect which

[c-nsp] High CPU caused by interupt on 7600 router

2010-10-01 Thread Rin
Hi group, I have a 7609 PE router with 2 TenGigabit interfaces uplink to other P routers and Gigabit interfaces downlink to access switch. Recently, I detect the CPU of that router is punted approximately every 35mins and result in below output: ===

Re: [c-nsp] Service agreement warning for EOL hardware

2010-10-01 Thread Asbjorn Hojmark - Lists
On Fri, 01 Oct 2010 01:42:22 +0200, you wrote: > "End of new service attachment - November 2006". You could buy a > router in November 2002. Then, four years later you decided it was > a last call for extending the life of your network. > By either renewing yearly the service contract during the e

Re: [c-nsp] Cisco TwinGig Converter on 7600?

2010-10-01 Thread Artyom Viklenko
30.09.2010 22:41, Felix Nkansah пишет: Hi, Does anyone know if the Cisco twingig converter can be setup on the Cisco 7600 platform. The commands for enabling them on the 4500 don't seem to be available on my 7600. Appreciate your response. Thanks. Felix Short answer - no. Not any X2 slot su

Re: [c-nsp] Service agreement warning for EOL hardware

2010-10-01 Thread Elmar K. Bins
Re Seth, se...@rollernet.us (Seth Mattinen) wrote: > I don't think too many of Cisco's latest ideas on how the website should > function (remember Java-only download cart introduction day) are in line > with real life. I have wondered for years now, why Cisco wouldn't enforce service contracts o